hwifPpsBcastDisValControl
HUAWEI-LswINF-MIB ·
.1.3.6.1.4.1.2011.2.23.1.1.1.1.13
Object
column
r/w
Enumeration
Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast.
Context
- MIB
- HUAWEI-LswINF-MIB
- OID
.1.3.6.1.4.1.2011.2.23.1.1.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwifXXEntry
- Table
- hwifXXTable
- Siblings
- 40
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwifUnBoundPort Whether it is the unbound port. (true indicates that the port is
the main port of the aggregation or the port does not participate
in the aggregation.) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.2.23.1.1.1.1.1 |
| hwifXXBasePortIndex Index number of the port and the first port index of the
device is 1. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.10 |
| hwifXXDevPortIndex Device index of the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.11 |
| hwifPpsMcastControl The broadcast suppression with pps(packet per second) type.
The max value is determined by the port type and product. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.12 |
| hwifUniSuppressionStep The step of unicast suppression in ratio mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.14 |
| hwifPpsUniSuppressionMax The max pps(packet per second) value of unicast suppression
in pps mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.15 |
| hwifMulSuppressionStep The step of multicast suppression in ratio mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.16 |
| hwifPpsMulSuppressionMax The max pps(packet per second) value of multicast suppression
in pps mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.17 |
| hwifUniSuppression The unicast suppression with the ranging from 0 to 100 percent
in ratio mode.
The step is determined by hwifUniSuppressionStep. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.18 |
| hwifPpsUniSuppression The unicast suppression in pps(packet per second) mode.
The max value is determined by hwifPpsUniSuppressionMax. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.19 |
| hwifISPhyPort Whether it is a physical interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.2.23.1.1.1.1.2 |
| hwifMulSuppression The multicast suppression with ranging from 0 to 100 percent
in ratio mode.
The step is determined by hwifMulSuppressionStep.
If hwifMulSuppressionFlag is 2 it means only unknown
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.20 |
| hwifPpsMulSuppression The multicast suppression in pps(packet per second) mode.
The max pps value is determined by hwifPpsMulSuppressionMax.
If hwifMulSuppressionFlag is 2 it means only unknown
traffic… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.21 |
| hwifComboActivePort obsolete Active port on combo interface. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.1.1.1.22 |
| hwifBMbpsMulSuppressionMax The maximum value of the multicast suppression with bandwidth-based(Mbps)
that a port can be configured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.23 |
| hwifBMbpsMulSuppression With bandwidth-based multicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the multicast suppession with bandwidth-based(Mbps)
is the value of hwifBMbpsMulS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.24 |
| hwifBKbpsMulSuppressionMax The maximum value of the multicast suppression with bandwidth-based(Kbps)
that a port can be configured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.25 |
| hwifBKbpsMulSuppressionStep The step of multicast suppression with bandwidth-based(Kbps). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.26 |
| hwifBKbpsMulSuppression With bandwidth-based multicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the multicast suppession with bandwidth-based(Kbps)
is the value of hwifBKbpsMulS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.27 |
| hwifUnknownPacketDropMul Control the port's unknown-multicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-multicast packets in inbound direction. When
outbound… | column | DropDirection | .1.3.6.1.4.1.2011.2.23.1.1.1.1.28 |
| hwifUnknownPacketDropUni Control the port's unknown-unicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-unicast packets in inbound direction. When
outbound dir… | column | DropDirection | .1.3.6.1.4.1.2011.2.23.1.1.1.1.29 |
| hwifAggregatePort Whether it is the aggregated port. (if the port participates
in the aggregation, this value is true.) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.2.23.1.1.1.1.3 |
| hwifBMbpsUniSuppressionMax The maximum value of the unicast suppression with bandwidth-based
(Mbps) that a port can be configured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.30 |
| hwifBMbpsUniSuppression With bandwidth-based Unicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the unicast suppession with bandwidth-based(Mbps)
is the value of hwifBMbpsUniSuppr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.31 |
| hwifBKbpsUniSuppressionMax The maximum value of the unicast suppression with bandwidth-based
(Kbps) that a port can be configured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.32 |
| hwifBKbpsUniSuppressionStep The step of unicast suppression with bandwidth-based(Kbps). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.33 |
| hwifBKbpsUniSuppression With bandwidth-based unicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the unicast suppession with bandwidth-based(Kbps)
is the value of hwifBKbpsUniSuppr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.34 |
| hwifOutPayloadOctets The actual output octets of the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.35 |
| hwifInPayloadOctets The actual input octets of the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.36 |
| hwifInErrorPktsRate The rate of inbound error packets on the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.37 |
| hwifInPkts The number of packets received on the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.38 |
| hwifInNormalPkts The number of normal packets received on the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.39 |
| hwifMirrorPort Whether it is a mirror port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.2.23.1.1.1.1.4 |
| hwifOutPkts The number of packets sent on the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.40 |
| hwifMulSuppressionFlag The multicast suppression flag. If only unknown multicast
traffic is suppressed, the value is unknown(2), and all(1) for suppression of all traffic (unknown and known). | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.1.1.1.41 |
| hwifVLANType port vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.1.1.1.5 |
| hwifMcastControl Broadcast storm suppression with the step length of 1,
ranging from 0 to 100 percent.
In some products the step is 5, ranging from 0 to 100. | column | Integer32 | .1.3.6.1.4.1.2011.2.23.1.1.1.1.6 |
| hwifFlowControl Flow control status. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.2.23.1.1.1.1.7 |
| hwifSrcMacControl Whether to filter by source MAC address. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.2.23.1.1.1.1.8 |
| hwifClearStat Clear specify port statistics. Operation read is not supported. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.1.1.1.9 |