hwifMacAddrLearnMode
HUAWEI-LswINF-MIB ·
.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.11
Object
column
Enumeration
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
Context
- MIB
- HUAWEI-LswINF-MIB
- OID
.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwethernetEntry
- Table
- hwethernetTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | iVL |
2 | sVL |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwifEthernetTest Test this interface.
The actual testing will be different according to products.
Read operation not supported. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.10 |
| hwifEthernetFlowInterval Set flow interval of the ethernet.
The NMS should set value to integer which is a multiple of 5. | column | Integer32 | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.12 |
| hwifEthernetIsolate Isolate group means that all ports in the same isolate group can not
send and receive packets each other.
Each octet within this value specifies a set of eight isolate groups,
wit… | column | OctetString | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.13 |
| hwifVlanVPNStatus Vlan VPN enable status. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.14 |
| hwifVlanVPNUplinkStatus Vlan VPN uplink status. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.15 |
| hwifVlanVPNTPID Port based Vlan VPN TPID(Tag Protocol Indentifier), default value
is 0x8100.
Please refer to hwVlanVPNTPIDMode to get more information. | column | Integer32 | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.16 |
| hwifIsolateGroupID Isolate group identifier. Value zero means this interface does not
belong to any isolate group. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.17 |
| hwifisUplinkPort Ethernet uplink status, default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.18 |
| hwifEthernetAutoSpeedMask This object specifies which kinds of speed mode can be negotiated.
Each bit corresponds to a kind of speed mode.
If the value of a bit is '1', it means the correspo… | column | SpeedModeFlag | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.19 |
| hwifEthernetAutoSpeed This object indicates which kinds of speed mode are negotiable
on this port.
Only when a bit of hwifEthernetAutoSpeedMask is '1', the corresponding
bit of this obje… | column | SpeedModeFlag | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.20 |
| hwifEthernetDuplex Ethernet interface mode. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.3 |
| hwifEthernetMTU MTU on the Ethernet interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.4 |
| hwifEthernetSpeed Ethernet interface speed. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.5 |
| hwifEthernetMdi Type of the line connected to the port.
MDI-II (straight-through cable): 1
MDI-X (crossover cable): 2
MDI-AUTO (auto-sensing): 3 | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.7 |
| hwMaxMacLearn The maximum number of MAC addresses that the port can learn.
The value -1 means that the number of Mac addresses that the port
can learn is unlimited. | column | Integer32 | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.8 |
| hwifMacAddressLearn This object indicates if the interface is allowed to learn mac address.
eanbled(1) means the interface can learn mac address, otherwise disabled(2)
can be set. | column | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.9 |