hwifEthernetMdi

HUAWEI-LswINF-MIB · .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.7

MIB view Table view

Object

column r/w Enumeration

Type of the line connected to the port.
MDI-II (straight-through cable): 1
MDI-X (crossover cable): 2
MDI-AUTO (auto-sensing): 3

Context

MIB: HUAWEI-LswINF-MIB
OID: .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.7
Type: column
Access: readwrite
Status: current
Parent: hwethernetEntry
Table: hwethernetTable
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	mdi-ii
`2`	mdi-x
`3`	mdi-auto

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwifEthernetTest Test this interface. The actual testing will be different according to products. Read operation not supported.	column	Enumeration	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.10`
hwifMacAddrLearnMode Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.	column	Enumeration	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.11`
hwifEthernetFlowInterval Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.	column	Integer32	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.12`
hwifEthernetIsolate Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, wit…	column	OctetString	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.13`
hwifVlanVPNStatus Vlan VPN enable status.	column	Enumeration	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.14`
hwifVlanVPNUplinkStatus Vlan VPN uplink status.	column	Enumeration	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.15`
hwifVlanVPNTPID Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hwVlanVPNTPIDMode to get more information.	column	Integer32	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.16`
hwifIsolateGroupID Isolate group identifier. Value zero means this interface does not belong to any isolate group.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.17`
hwifisUplinkPort Ethernet uplink status, default value is 2.	column	Enumeration	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.18`
hwifEthernetAutoSpeedMask This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the correspo…	column	SpeedModeFlag	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.19`
hwifEthernetAutoSpeed This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hwifEthernetAutoSpeedMask is '1', the corresponding bit of this obje…	column	SpeedModeFlag	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.20`
hwifEthernetDuplex Ethernet interface mode.	column	Enumeration	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.3`
hwifEthernetMTU MTU on the Ethernet interface.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.4`
hwifEthernetSpeed Ethernet interface speed.	column	Enumeration	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.5`
hwMaxMacLearn The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.	column	Integer32	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.8`
hwifMacAddressLearn This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.	column	Enumeration	`.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.9`