hwifEthernetIsolate

HUAWEI-LswINF-MIB · .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.13
MIB view Table view

Object

column r/w OctetString 
Isolate group means that all ports in the same isolate group can not
send and receive packets each other.
Each octet within this value specifies a set of eight isolate groups,
with the first octet specifying isolate groups 1 through 8,  the second
octet specifying isolate groups 9 through 16, etc. Within each octet,
the leftmost bit is the first bit.
the first bit represents the lowest numbered isolate group, and the
last bit represents the highest numbered isolate group. one port can
belong to more than one isolate group.
Thus, each isolate group is represented by a single bit within the
value of this object.
If that bit has a value of '1', then that isolate group includes this port;
the port is not included if its bit has a value of '0'.
for example, the first octet is '10000100' means that the port is
included in the isolate group 1 and isolate group 6.

Context

MIB
HUAWEI-LswINF-MIB
OID
.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.13
Type
column
Access
readwrite
Status
current
Parent
hwethernetEntry
Table
hwethernetTable
Siblings
16

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwifEthernetTest
Test this interface. The actual testing will be different according to products. Read operation not supported.
columnEnumeration.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.10
hwifMacAddrLearnMode
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
columnEnumeration.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.11
hwifEthernetFlowInterval
Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.
columnInteger32.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.12
hwifVlanVPNStatus
Vlan VPN enable status.
columnEnumeration.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.14
hwifVlanVPNUplinkStatus
Vlan VPN uplink status.
columnEnumeration.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.15
hwifVlanVPNTPID
Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hwVlanVPNTPIDMode to get more information.
columnInteger32.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.16
hwifIsolateGroupID
Isolate group identifier. Value zero means this interface does not belong to any isolate group.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.17
hwifisUplinkPort
Ethernet uplink status, default value is 2.
columnEnumeration.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.18
hwifEthernetAutoSpeedMask
This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the correspo…
columnSpeedModeFlag.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.19
hwifEthernetAutoSpeed
This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hwifEthernetAutoSpeedMask is '1', the corresponding bit of this obje…
columnSpeedModeFlag.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.20
hwifEthernetDuplex
Ethernet interface mode.
columnEnumeration.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.3
hwifEthernetMTU
MTU on the Ethernet interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.4
hwifEthernetSpeed
Ethernet interface speed.
columnEnumeration.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.5
hwifEthernetMdi
Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3
columnEnumeration.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.7
hwMaxMacLearn
The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.
columnInteger32.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.8
hwifMacAddressLearn
This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.
columnEnumeration.1.3.6.1.4.1.2011.2.23.1.5.1.4.1.9