hwGlobalBroadcastMaxPps
HUAWEI-LswINF-MIB ·
.1.3.6.1.4.1.2011.2.23.1.5.1.6
Object
scalar
r/w
Integer32
The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting.
Context
- MIB
- HUAWEI-LswINF-MIB
- OID
.1.3.6.1.4.1.2011.2.23.1.5.1.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwLswL2InfMibObject
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-14881000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSlotPortMax Max ports of the slots. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.5.1.1 |
| hwVlanVPNTPID Global Vlan VPN TPID(Tag Protocol Indentifier), default value
is 0x8100. | scalar | Integer32 | .1.3.6.1.4.1.2011.2.23.1.5.1.10 |
| hwPortIsolateGroupTable Isolate Group attribute table. | table | - | .1.3.6.1.4.1.2011.2.23.1.5.1.11 |
| hwMaxMacLearnRange The maximum number of MAC address that the port supports. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.5.1.12 |
| hwifPortProtocolStatTable This table contains objects of port statistics information based on
IPv4 and IPv6 protocols. | table | - | .1.3.6.1.4.1.2011.2.23.1.5.1.13 |
| hwSwitchPortMax Max ports that this switch includes. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.5.1.2 |
| hwifVLANTrunkStatusTable Gvrp attributes on the VlanTrunk port. | table | - | .1.3.6.1.4.1.2011.2.23.1.5.1.3 |
| hwethernetTable Ethernet port attribute table. | table | - | .1.3.6.1.4.1.2011.2.23.1.5.1.4 |
| hwIsolateGroupMax Max isolate group that this device support, the value is zero
means that the device does not support isolate group. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.2.23.1.5.1.5 |
| hwGlobalBroadcastMaxRatio The global max-ratio of broadcast from 0 to 100 percent.
When it is set, the value of BroadcastMaxRatio in all ports
will be changed to that setting. | scalar | Integer32 | .1.3.6.1.4.1.2011.2.23.1.5.1.7 |
| hwBpduTunnelStatus Bpdu tunnel enable status. | scalar | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.8 |
| hwVlanVPNTPIDMode Vlan VPN TPID mode.
The value 'port-based' means VLAN VPN TPID value would be set based
on port via hwifVlanVPNTPID. In this situation, hwVlanVPNTPID is
meaningless and… | scalar | Enumeration | .1.3.6.1.4.1.2011.2.23.1.5.1.9 |