hwIpDslamVmacControlprotocolIpv6oeStatus
HUAWEI-IPDSLAM-VMAC-MIB ·
.1.3.6.1.4.1.2011.6.110.11
Object
scalar
r/w
Enumeration
It is used to query and set the VMAC control protocol of IPv6oE status. Options: 1. disable(1) -indicates the VMAC control protocol of IPv6oE status disable 2. enable(2) -indicates the VMAC control protocol of IPv6oE status enable Default: disable(1)
Context
- MIB
- HUAWEI-IPDSLAM-VMAC-MIB
- OID
.1.3.6.1.4.1.2011.6.110.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwIpDslamVmac
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disable |
2 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIpDslamVmacStatus Identifies the global status of the VMAC function.
Options:
1. macpoolMode(1) -indicates the global status of the VMAC function is macpoolMode
2. disabled(2) -indica… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.110.1 |
| hwOltVmacUmacMappingTable Indicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The indexe… | table | - | .1.3.6.1.4.1.2011.6.110.10 |
| hwIpDslamVmacSlotNumbering It is used to query and set the VMAC slot number format.
Options:
1. logical(1) -indicates the VMAC slot number format is logical
2. physical(2) -indicates the VMAC… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.110.12 |
| hwIpDslamVmacPortBegin It is used to query and set the starting portid of VMAC.
Range: 0-1, 4294967295
Default: 4294967295
The value 4294967295 indicates that the port-based VMAC starting portid is 0, b… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.110.13 |
| hwIPoESmacCurrentUserTable Used for querying the information about a IPoE single-MAC user.
The indexes of this table are ifIndex and hwIPoESmacUserIndex. | table | - | .1.3.6.1.4.1.2011.6.110.14 |
| hwIpDslamVmacPortVmacNum Identifies the number of VMAC addresses of each port, which is used for
setting or querying the number of VMAC addresses of a port.
Range: 1-32
Default: 32 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.110.2 |
| hwIpDslamVmacAllocationTable VMAC allocation mapping table.
The indexes of this table are hwIpDslamVmacAllocationIfIndex, hwIpDslamVmacAllocationStartmac
and hwIpDslamVmacAllocationScope. | table | - | .1.3.6.1.4.1.2011.6.110.3 |
| hwIpDslamVmacUmacMappingTable Indicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The inde… | table | - | .1.3.6.1.4.1.2011.6.110.4 |
| hwIpDslamVmacDslamId Identifies the DSLAM ID, which is used for setting or querying the DSLAM ID.
Range: 0x0-0xFFFFFFFF
Default: 0x7FFFF
When the VMAC function is enabled based on DSLAM ID, the DSLAM … | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.110.5 |
| hwIpDslamVmacReserveBits Identifies the reserved bits in a VMAC address, which occupies 6 bits. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.110.6 |
| hwIpDslamIPoEMacMode Used for setting and querying the MAC address mode of a dynamic IPoE user.
Options:
1. multiMac(1) -indicates the MAC address mode is multiMac
2. singleMac(2) -indicates the MAC … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.110.7 |
| hwIpDslamVmacOltId Identifies the OLT ID, which is used for setting or querying the OLT ID.
Range: 0x0-0xFFFF
Default: 0xFFFF
When the VMAC function is enabled based on OLT ID, the OLT ID and the
r… | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.110.8 |
| hwIpDslamVmacOntVmacNum Identifies the number of VMAC addresses of each ONT, which is used for
setting or querying the number of VMAC addresses of an ONT.
Range: 1-8
Default: 8 | scalar | Integer32 | .1.3.6.1.4.1.2011.6.110.9 |