hwGponOntPortVlanCfgType
HUAWEI-GPON-MIB ·
.1.3.6.1.4.1.2011.5.100.1.1.1.60.1.7
Object
column
r/w
Enumeration
The VLAN configuraton type of Eth port: 2-translation or 3-qinq. Options: 1. translation(2) -The VLAN configuraton type of Eth port is translation 2. qinq(3) -The VLAN configuraton type of Eth port is qinq
Context
- MIB
- HUAWEI-GPON-MIB
- OID
.1.3.6.1.4.1.2011.5.100.1.1.1.60.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwGponOntPortVlanCfgEntry
- Table
- hwGponOntPortVlanCfgTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponOntPortVlanCfgOntPhyType Port type of the ONT.
Options:
1. vdsl(37) -Port type of the ONT is vdsl
2. wifi(40) -Port type of the ONT is wifi
3. moca(46) -Port type of the ONT is moca
4. eth(47) -P… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.1 |
| hwGponOntPortVlanCfgSPriPolicy S-vlan priority policy.
Options:
1. specify(1) - S-vlan priority policy is specify
2. userCos(2) - S-vlan priority policy is user-cos
3. dscpMapping(3) - S-vlan priority … | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.10 |
| hwGponOntPortVlanCfgDscpDefaultPriority The default priority for dscp-mapping policy. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.11 |
| hwGponOntPortVlanCfgTlsSwitch The switch used to config the attribute of vlan translation.
Options:
1. off(1) - Disable the switch
2. on(2) - Enable the switch
3. invalidValue(-1) - Invali… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.12 |
| hwGponOntPortVlanCfgOntPhyIndex Port index of the ONT. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.2 |
| hwGponOntPortVlanCfgCVlan The customer VLAN which is used as the index of the table.
If configure standard vlan of the ont port, you can set S-VLAN same as C-VLAN,
or don't set leaves hwGponOntPortVlanCfgS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.3 |
| hwGponOntPortVlanCfgSVlan The Ont port service vlan. It is standard vlan of the ont port when the S-VLAN is same as the C-VLAN.
Range: 0-4095 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.4 |
| hwGponOntPortVlanCfgSPri The service priority after the customer vlan translation or qinq.
set Range: 0-7
-1 indicates has not set the S-VLAN priority. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.5 |
| hwGponOntPortVlanCfgRowStatus Row status. This object is used to differentiate the
creation, modification and deletion operations for an object.
Options:
1. createAndGo(4) -create a new instance of a conceptua… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.6 |
| hwGponOntPortVlanCfgCPri The customer priority after the customer vlan translation or qinq.
When the priority may not be specified, should input -1.
Range: 0-7 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.8 |
| hwGponOntPortVlanCfgEtherType The customer service encapsulation type: IPv4-IPoE(1-default) or PPPoE(2) or IPv6-IPoE(4).
Options:
1. ipv4-ipoe(1) -The customer service encapsulation type is ipv4 ipoe
2. pppoe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.60.1.9 |