hwGponDeviceStatObjects
HUAWEI-GPON-MIB ·
.1.3.6.1.4.1.2011.5.100.1.1.2
Object
node
No description available.
Context
- MIB
- HUAWEI-GPON-MIB
- OID
.1.3.6.1.4.1.2011.5.100.1.1.2- Type
- node
- Parent
- hwGponDeviceObjects
- Siblings
- 17
- Children
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceControlObjects | node | - | .1.3.6.1.4.1.2011.5.100.1.1.1 |
| hwEponDeviceCtcOui ID of the organization issuing the extended OAM. It is used to check whether the system supports the extended OAM when it is found. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.100.1.1.10 |
| hwEponDeviceChangePasswordAge Update period of the encryption key of the ONT.
Ranging from 1 to 254. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.11 |
| hwGponDeviceBaseGemport This object is used to set the start GEM port ID of the entire system in the GEM port CoS rate limitation mode.
Ranging from 128 to 3872. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.12 |
| hwGponDeviceMinBandwidth The scalar is used to configure the minimum bandwidth of the T-CONTs in the system.
Ranging from 384 to 1024. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.13 |
| hwXponDeviceModeCfg This object is used to change XPON management mode.
After the mode being changed, system will automatically
save data and reboot.
Options:
1. distributingmode(1) - Distributing… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.14 |
| hwGponDeviceAutoDetectRogueOnt This object is used to open/close the switch of rogue ONT automatic detection.
Options:
1. on(1) - Open the switch of rogue ONT automatic detection
2. off(2) - Close the switch o… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.15 |
| hwGponDeviceLineTestObjects | node | - | .1.3.6.1.4.1.2011.5.100.1.1.16 |
| hwGponDeviceDbaBandwidthTypeCfg This object is used to configure the type of DBA bandwidth.
Options:
1. gpon(1) - gpon type
2. ethernet(2) - ethernet type | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.20 |
| hwGponDeviceDbaAssignmentModeCfg This object is used to configure the DBA bandwidth assignment mode.
Options:
1. maxbandwidthusage(1) - max bandwidth usage mode
2. minloopdelay(2) - min loop delay mode
3. ma… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.21 |
| hwGponDeviceAutoFindOntAge The aging time of the auto-found ONT, which can be 0s (indicating that the ONT will not aging) or a value from 100s to 300s | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.3 |
| hwGponDeviceAutoFindInterval Auto find interval, ranging from 1(s) to 10(s). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.4 |
| hwGponDeviceBroadcastPortId The special GEM Port ID used for the broadcast service.
Ranging from 4000 to 4095. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.5 |
| hwGponDeviceMulticastPortId The special GEM Port ID used for the multicast service.
Ranging from 4000 to 4095. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.6 |
| hwGponDeviceInvalidPortId Invalid GEM Port ID.
Ranging from 4000 to 4095. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.7 |
| hwGponDeviceConfigResume This is the policy of the system to resume the configuration of the ONT.
Options:
1. resume(1) -resume the configuration of the ONT
2. noresume(2) -no resume the configuration o… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.8 |
| hwEponMulticastControlMode Multicast control mode.
Options:
1. ctc(1) - The multicast control mode is ctc
2. igmpsnooping(2) - The multicast control mode is igmpsnooping | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceOntRegInfoTable This table is used to query the register information about the ONT,
including the ONT SN, register time and register result.
The indexes of this table are ifIndex and hwGponDevice… | table | - | .1.3.6.1.4.1.2011.5.100.1.1.2.1 |
| hwGponGtcStatisticTable GPON port GTC statistics table,
used to query the number of received and sent GTC frames on the GPON port.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.100.1.1.2.10 |
| hwGponOntStatisticsTable ONT performance statistics table, used for querying the number of upstream and downstream frames,
bytes, and dropped packets of the ONT.This table is used in xpon distributing mod… | table | - | .1.3.6.1.4.1.2011.5.100.1.1.2.11 |
| hwGponGemportStatisticsTable GEM port performance statistics table, used to query the number of upstream and downstream frames,
bytes, and dropped packets of the GEM port.
The indexes of this table are ifInde… | table | - | .1.3.6.1.4.1.2011.5.100.1.1.2.12 |
| hwGponOntEtherStatsTable ONT ETH port statistics table, used for querying and clearing the information about the ETH port.
The indexes of this table are ifIndex,
hwGponDeviceOntObjectIndex, hwGponOntifEth… | table | - | .1.3.6.1.4.1.2011.5.100.1.1.2.6 |
| hwGponOntTrafficFlowStatsTable The ONT traffic stream statistics table,
Used for checking the number of LOFI alarms and number of upstream and downstream BIP errors on the ONT connected to a port.
The indexes o… | table | - | .1.3.6.1.4.1.2011.5.100.1.1.2.7 |
| hwGponOntGemPortStatsTable ONT GEM port statistics table, used for querying and clearing the information about the GEM port.
The indexes of this table are ifIndex,
hwGponDeviceOntObjectIndex and hwGponDevic… | table | - | .1.3.6.1.4.1.2011.5.100.1.1.2.8 |
| hwGponOltEtherStatisticTable This table is used to query the number of frames corresponding to
the received, sent, and discarded Ethernet packets on the GPON port.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.100.1.1.2.9 |