hwGponDeviceOntReDiscovery
HUAWEI-GPON-MIB ·
.1.3.6.1.4.1.2011.5.100.1.1.1.6.1.8
Object
column
r/w
Enumeration
This object is used to reset the discovery status of an ONT. If the authentication mode is once-on(4), after performing the rediscovery operation, the registered working period is re-timed. Options: 1. rediscovery (1) -Reset the discovery status of an ONT 2. invalidValue(-1)-The discovery status of an ONT is valid
Context
- MIB
- HUAWEI-GPON-MIB
- OID
.1.3.6.1.4.1.2011.5.100.1.1.1.6.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwGponDeviceOntControlEntry
- Table
- hwGponDeviceOntControlTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | notRejected |
1 | aclNotExst |
2 | aclOvrfl |
3 | authErr |
4 | fltrErr |
5 | ipv6WithMac |
6 | ipv6WithNotIp |
7 | polBasicMode |
8 | aclDel |
9 | polDel |
10 | vlanDfly |
11 | vlanDynam |
12 | vlanGuest |
13 | vlanNoInMsg |
14 | vlanNotExst |
15 | vlanOvfl |
16 | vlanVoice |
17 | vlanUnauth |
18 | frsMthDeny |
19 | radApierr |
20 | radInvlres |
21 | radNoresp |
22 | aclEgress |
23 | maxHosts |
24 | noActivity |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceOntObjectAction This object is used to activate or deactivate an ONT.
Options:
1. activate(1) -activate an ONT
2. deactivate(2) -deactivate an ONT | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.1 |
| hwGponDeviceOntRangingValue The result of the ONT ranging (m) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.10 |
| hwGponDeviceOntBatteryCurStatus The ONT battery status.
Options:
1. notSupport(0) - not support
2. charge(1) - charge state
3. discharge(2) - discharge state
4. holding(3) - h… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.11 |
| hwGponDeviceOntObjectIsolationState The ONT isolation status.
Options:
1. normal(0) -The ONT isolation status is normal
2. isolated(1) -The ONT isolation status is isolated | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.12 |
| hwGponDeviceOntObjectPrimaryStatus The primary status of the Board.This parameter indicates the current overall
service condition of an entity, i.e., whether it is in-service or out-of-service.
Options:
1. isNr(1) … | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.13 |
| hwGponDeviceOntObjectSecondaryStatus This parameter indicates the secondary status of the board. The parameter provides additional
information pertaining to PST and PSTQ. For example, it may indicate the type and/or … | column | Bits | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.14 |
| hwGponDeviceOntObjectTcontNumCombined The number of the combined T-CONTs. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.15 |
| hwGponDeviceOntObjectMemoryOccupation The Memory occupation of the ONT, range: 0-100. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.16 |
| hwGponDeviceOntObjectCpuOccupation The CPU occupation of the ONT, range: 0-100. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.17 |
| hwGponDeviceOntObjectTemperature The temperature of the ONT.
Unit: degree centigrade. | column | degree centigrade SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.18 |
| hwGponDeviceOntLastRangingValue The result of the ONT last ranging (m) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.19 |
| hwGponDeviceOntObjectReset This object is used to reset an ONT.
Options:
1. reset (1) -Reset an ONT
2. invalidValue(-1) -Invalid value | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.2 |
| hwGponDeviceOntObjectActualSn The ONT's actual serial number. | column | OctetString | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.20 |
| hwGponDeviceOntObjectRunStatus The ONT running status.
Options:
1. up (1) -The ONT running status is normal
2. down (2) -The ONT running status is fault
3. invalidValue(-1) -The ONT running st… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.4 |
| hwGponDeviceOntObjectConfigStatus This is the ONT configuration resume status. If it is failed(3),
the ONT is down and the service is interrupted.
If the config status is noresume (4), set the resume policy as
res… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.5 |
| hwGponDeviceOntObjectReRegister This object is used to re-register an ONT.
Options:
1. reRegister (1) - Re-register an ONT
2. invalidValue(-1) - Invalid value | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.6 |
| hwGponDeviceOntObjectDiscoveryStatus The ONT discovery status. This object is used to check whether the
serial number can be changed by the password authentication ONTs.
On (1) indicates that the SN can be changed. O… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.7 |
| hwGponDeviceOntObjectMatchStatus The ONT match status DEFVAL { 1 }
Options:
1. initialization (1) -The ONT status is initialization
2. match (2) -The ONT status is match
3. mismatch (3) -The ONT st… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.9 |