hwGponDeviceOntObjectSecondaryStatus
HUAWEI-GPON-MIB ·
.1.3.6.1.4.1.2011.5.100.1.1.1.6.1.14
Object
column
Bits
This parameter indicates the secondary status of the board. The parameter provides additional information pertaining to PST and PSTQ. For example, it may indicate the type and/or reason of the external command, the event that occurred in the Network Element, etc. Multiple values may apply to an entity at a given moment. The highest bit of SST value indicates the sst-ains(0) status; the second highest bit of SST value indicates the sst-faf(1) status, and the rest can be deduced by analogy. This BITS structure can report the following status: 1. sstAins(0) - this bit position positively reports that the status of the board is automatic inService 2. sstFaf(1) - Facility Failure 3. sstFlt(2) - Fault 4. sstLpbk(3) - Loopback 5. sstMea(4) - Mismatch of Equipment and Attributes 6. sstSgeo(5) - Supporting Entity Outage 7. sstStbyh(6) - Standby-Hot 8. sstTs(7) - Test 9. sstUas(8) - Unassigned 10. sstUeq(9) - Unequipped 11. sstWrk(10) - Working 12. sstPwr(11) - Power
Context
- MIB
- HUAWEI-GPON-MIB
- OID
.1.3.6.1.4.1.2011.5.100.1.1.1.6.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwGponDeviceOntControlEntry
- Table
- hwGponDeviceOntControlTable
- Siblings
- 18
Syntax
Bits
Values & Constraints
Enumerated Values
1 | initialize |
2 | disconnected |
3 | connecting |
4 | authenticating |
5 | authenticated |
6 | aborting |
7 | held |
8 | forceAuth |
9 | forceUnauth |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceOntObjectAction This object is used to activate or deactivate an ONT.
Options:
1. activate(1) -activate an ONT
2. deactivate(2) -deactivate an ONT | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.1 |
| hwGponDeviceOntRangingValue The result of the ONT ranging (m) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.10 |
| hwGponDeviceOntBatteryCurStatus The ONT battery status.
Options:
1. notSupport(0) - not support
2. charge(1) - charge state
3. discharge(2) - discharge state
4. holding(3) - h… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.11 |
| hwGponDeviceOntObjectIsolationState The ONT isolation status.
Options:
1. normal(0) -The ONT isolation status is normal
2. isolated(1) -The ONT isolation status is isolated | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.12 |
| hwGponDeviceOntObjectPrimaryStatus The primary status of the Board.This parameter indicates the current overall
service condition of an entity, i.e., whether it is in-service or out-of-service.
Options:
1. isNr(1) … | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.13 |
| hwGponDeviceOntObjectTcontNumCombined The number of the combined T-CONTs. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.15 |
| hwGponDeviceOntObjectMemoryOccupation The Memory occupation of the ONT, range: 0-100. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.16 |
| hwGponDeviceOntObjectCpuOccupation The CPU occupation of the ONT, range: 0-100. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.17 |
| hwGponDeviceOntObjectTemperature The temperature of the ONT.
Unit: degree centigrade. | column | degree centigrade SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.18 |
| hwGponDeviceOntLastRangingValue The result of the ONT last ranging (m) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.19 |
| hwGponDeviceOntObjectReset This object is used to reset an ONT.
Options:
1. reset (1) -Reset an ONT
2. invalidValue(-1) -Invalid value | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.2 |
| hwGponDeviceOntObjectActualSn The ONT's actual serial number. | column | OctetString | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.20 |
| hwGponDeviceOntObjectRunStatus The ONT running status.
Options:
1. up (1) -The ONT running status is normal
2. down (2) -The ONT running status is fault
3. invalidValue(-1) -The ONT running st… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.4 |
| hwGponDeviceOntObjectConfigStatus This is the ONT configuration resume status. If it is failed(3),
the ONT is down and the service is interrupted.
If the config status is noresume (4), set the resume policy as
res… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.5 |
| hwGponDeviceOntObjectReRegister This object is used to re-register an ONT.
Options:
1. reRegister (1) - Re-register an ONT
2. invalidValue(-1) - Invalid value | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.6 |
| hwGponDeviceOntObjectDiscoveryStatus The ONT discovery status. This object is used to check whether the
serial number can be changed by the password authentication ONTs.
On (1) indicates that the SN can be changed. O… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.7 |
| hwGponDeviceOntReDiscovery This object is used to reset the discovery status of an ONT. If the
authentication mode is once-on(4), after performing the rediscovery
operation, the registered working period is… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.8 |
| hwGponDeviceOntObjectMatchStatus The ONT match status DEFVAL { 1 }
Options:
1. initialization (1) -The ONT status is initialization
2. match (2) -The ONT status is match
3. mismatch (3) -The ONT st… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.6.1.9 |