hwGponDeviceOltObjectIlegalIncurRogueOntExt
HUAWEI-GPON-MIB ·
.1.3.6.1.4.1.2011.5.100.1.1.1.2.1.5
Object
column
Enumeration
Querying whether there are illegal incursionary rogue ONTs under port. Options: 1. inexistent (0) - There aren't illegal incursionary rogue ONTs under port 2. existent (1) - There are illegal incursionary rogue ONTs under port 3. invalidValue(-1) - Invalid value
Context
- MIB
- HUAWEI-GPON-MIB
- OID
.1.3.6.1.4.1.2011.5.100.1.1.1.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwGponDeviceOltControlEntry
- Table
- hwGponDeviceOltControlTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | eapolOnly |
2 | macAndEapol |
3 | macOnly |
4 | webOnly |
5 | webAndEapol |
6 | webAndMac |
7 | webAndMacAndEapol |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceOltObjectLaserSwitch Laser switch of the GPON port.
Options:
1. on (1) - Open the laser switch of the GPON port
2. off (2) - Close the laser switch of the GPON port | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.1 |
| hwGponDeviceOltObjectTcontNumCombined The number of the combined T-CONTs. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.10 |
| hwGponDeviceOltObjectTcontNumInCard The number of T-CONTs in the card. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.11 |
| hwGponDeviceOltObjectEnergySavingFlag Energy saving state of the GPON port.
Options:
1. yes (1) - The GPON port is in energy saving state
2. no (2) - The GPON port is not in energy saving state | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.12 |
| hwGponDeviceOltObjectManualCheckRogueOnt This object indicates the switch of the rogue ONT manual check.
Options:
1. startup(1) - Start up the switch of the rogue ONT manual checked
2. invalid(-1) - Indicates that t… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.13 |
| hwGponDeviceOltObjectPortReset This parameter is used to reset the port.
Options:
1. reset(1) - Indicates that the port resets
2. invalid(-1) - Indicates that the query fails or no information is checked | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.14 |
| hwGponDeviceOltLoopbackGemportid Loopback GEM port ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.2 |
| hwGponDeviceOltObjectStatus The GPON port status in the OLT.
Options:
1. up (1) -normal
2. down (2) -fault | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.3 |
| hwGponDeviceOltObjectManualDetectRogueOnt Rogue ONT manual detection.
Options:
1. startup (1) - Rogue ONT manual detection is startup
2. invalidValue(-1) - Invalid value | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.4 |
| hwGponDeviceOltObjectOpticMoudleStatus The optic module status on GPON port.
Options:
1. online (1) - The optic module online
2. offline (2) - The optic module offline
3. invalidValue(-1) - Invalid value | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.6 |
| hwGponDeviceOltControlLastUpTime The time for PON port's last up.
The time starts from 00:00 o'clock on January 1, 1970.
Unit: seconds | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.7 |
| hwGponDeviceOltControlLastDownTime The time for PON port's last down.
The time starts from 00:00 o'clock on January 1, 1970.
Unit: seconds | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.8 |
| hwGponDeviceOltControlLastDownCause The cause of PON port's last down.
Options:
1. los(1) - Loss of signal
2. opticModuleAbsence(2) - Indicates that the optical transceiver is not installed
3. optic… | column | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.1.2.1.9 |