hwEponMulticastControlMode
HUAWEI-GPON-MIB ·
.1.3.6.1.4.1.2011.5.100.1.1.9
Object
scalar
r/w
Enumeration
Multicast control mode. Options: 1. ctc(1) - The multicast control mode is ctc 2. igmpsnooping(2) - The multicast control mode is igmpsnooping
Context
- MIB
- HUAWEI-GPON-MIB
- OID
.1.3.6.1.4.1.2011.5.100.1.1.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwGponDeviceObjects
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceControlObjects | node | - | .1.3.6.1.4.1.2011.5.100.1.1.1 |
| hwEponDeviceCtcOui ID of the organization issuing the extended OAM. It is used to check whether the system supports the extended OAM when it is found. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.100.1.1.10 |
| hwEponDeviceChangePasswordAge Update period of the encryption key of the ONT.
Ranging from 1 to 254. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.11 |
| hwGponDeviceBaseGemport This object is used to set the start GEM port ID of the entire system in the GEM port CoS rate limitation mode.
Ranging from 128 to 3872. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.12 |
| hwGponDeviceMinBandwidth The scalar is used to configure the minimum bandwidth of the T-CONTs in the system.
Ranging from 384 to 1024. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.13 |
| hwXponDeviceModeCfg This object is used to change XPON management mode.
After the mode being changed, system will automatically
save data and reboot.
Options:
1. distributingmode(1) - Distributing… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.14 |
| hwGponDeviceAutoDetectRogueOnt This object is used to open/close the switch of rogue ONT automatic detection.
Options:
1. on(1) - Open the switch of rogue ONT automatic detection
2. off(2) - Close the switch o… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.15 |
| hwGponDeviceLineTestObjects | node | - | .1.3.6.1.4.1.2011.5.100.1.1.16 |
| hwGponDeviceStatObjects | node | - | .1.3.6.1.4.1.2011.5.100.1.1.2 |
| hwGponDeviceDbaBandwidthTypeCfg This object is used to configure the type of DBA bandwidth.
Options:
1. gpon(1) - gpon type
2. ethernet(2) - ethernet type | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.20 |
| hwGponDeviceDbaAssignmentModeCfg This object is used to configure the DBA bandwidth assignment mode.
Options:
1. maxbandwidthusage(1) - max bandwidth usage mode
2. minloopdelay(2) - min loop delay mode
3. ma… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.21 |
| hwGponDeviceAutoFindOntAge The aging time of the auto-found ONT, which can be 0s (indicating that the ONT will not aging) or a value from 100s to 300s | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.3 |
| hwGponDeviceAutoFindInterval Auto find interval, ranging from 1(s) to 10(s). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.4 |
| hwGponDeviceBroadcastPortId The special GEM Port ID used for the broadcast service.
Ranging from 4000 to 4095. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.5 |
| hwGponDeviceMulticastPortId The special GEM Port ID used for the multicast service.
Ranging from 4000 to 4095. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.6 |
| hwGponDeviceInvalidPortId Invalid GEM Port ID.
Ranging from 4000 to 4095. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.100.1.1.7 |
| hwGponDeviceConfigResume This is the policy of the system to resume the configuration of the ONT.
Options:
1. resume(1) -resume the configuration of the ONT
2. noresume(2) -no resume the configuration o… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.100.1.1.8 |