hwEntPbxAt0TrkIndex
HUAWEI-ENT-VOICE-PBX-MIB ·
.1.3.6.1.4.1.2011.5.25.313.13.1.1
Object
column
SNMPv2-SMIInteger32
Indicates the index of the physical trunk,as follow:
31 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port 0
type
The highest 7 bits indicate the type of port, for BRA port, must be 0x19
the next 8 bits indicate the frame ID,
the next 6 bits indicate the slot ID,
the next 7 bits indicate the port ID,
the last 4 bits must be 0.
The type of port include:
AT0 port = 0x1b
Context
- MIB
- HUAWEI-ENT-VOICE-PBX-MIB
- OID
.1.3.6.1.4.1.2011.5.25.313.13.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- hwEntPbxAt0TrkEntry
- Table
- hwEntPbxAt0TrkTable
- Siblings
- 11
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEntPbxAt0TrkDefaultCalledNum Indicates the default called number. | column | OctetString | .1.3.6.1.4.1.2011.5.25.313.13.1.10 |
| hwEntPbxAt0TrkCidTransType Indicates the CID signal transmit type.
bell202(1)
v23(2)
ntt(3)
dtmf(4)
r15(5)
bell202V23Dtmf(6)
none(7)
default: bell202(1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.313.13.1.11 |
| hwEntPbxAt0PTPDialMode Indicates the dial mode.
dtmf(1)
pulse (2)
default: dtmf (1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.313.13.1.12 |
| hwEntPbxAt0TrkRowStatus Indicates the row status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.313.13.1.2 |
| hwEntPbxAt0TrkPhyStatus Indicates the config status of the at0 trunk.
block (1)
normal(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.313.13.1.3 |
| hwEntPbxAt0TrkSrvState Indicates the state of AT0 service state.
idle(1)
busy(2)
fault(3)
block(4) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.313.13.1.4 |
| hwEntPbxAt0TrkGroupName Indicates the at0 trunk group name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.313.13.1.5 |
| hwEntPbxAt0TrkDialDelay Indicates the value the time delay after dialling. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.313.13.1.6 |
| hwEntPbxAt0TrkInsertPrefix Indicates the insert prefix. | column | OctetString | .1.3.6.1.4.1.2011.5.25.313.13.1.7 |
| hwEntPbxAt0TrkInsertDelay Indicates the value of time delay after inserting a prefix.
default: 2000 | column | Integer32 | .1.3.6.1.4.1.2011.5.25.313.13.1.8 |
| hwEntPbxAt0ReversePole Indicates the Peer reverse pole support.
disable(1)
enable(2)
default: enable(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.313.13.1.9 |