hwEntPbxAt0TrkCidTransType
HUAWEI-ENT-VOICE-PBX-MIB ·
.1.3.6.1.4.1.2011.5.25.313.13.1.11
Object
column
r/w
Enumeration
Indicates the CID signal transmit type. bell202(1) v23(2) ntt(3) dtmf(4) r15(5) bell202V23Dtmf(6) none(7) default: bell202(1)
Context
- MIB
- HUAWEI-ENT-VOICE-PBX-MIB
- OID
.1.3.6.1.4.1.2011.5.25.313.13.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwEntPbxAt0TrkEntry
- Table
- hwEntPbxAt0TrkTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEntPbxAt0TrkIndex Indicates the index of the physical trunk,as follow:
31 0
0011001 | xxxxxxxx | xxxxxx | xxxxxxx | 0000
port frame slot port … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.313.13.1.1 |
| hwEntPbxAt0TrkDefaultCalledNum Indicates the default called number. | column | OctetString | .1.3.6.1.4.1.2011.5.25.313.13.1.10 |
| hwEntPbxAt0PTPDialMode Indicates the dial mode.
dtmf(1)
pulse (2)
default: dtmf (1) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.313.13.1.12 |
| hwEntPbxAt0TrkRowStatus Indicates the row status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.313.13.1.2 |
| hwEntPbxAt0TrkPhyStatus Indicates the config status of the at0 trunk.
block (1)
normal(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.313.13.1.3 |
| hwEntPbxAt0TrkSrvState Indicates the state of AT0 service state.
idle(1)
busy(2)
fault(3)
block(4) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.313.13.1.4 |
| hwEntPbxAt0TrkGroupName Indicates the at0 trunk group name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.313.13.1.5 |
| hwEntPbxAt0TrkDialDelay Indicates the value the time delay after dialling. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.313.13.1.6 |
| hwEntPbxAt0TrkInsertPrefix Indicates the insert prefix. | column | OctetString | .1.3.6.1.4.1.2011.5.25.313.13.1.7 |
| hwEntPbxAt0TrkInsertDelay Indicates the value of time delay after inserting a prefix.
default: 2000 | column | Integer32 | .1.3.6.1.4.1.2011.5.25.313.13.1.8 |
| hwEntPbxAt0ReversePole Indicates the Peer reverse pole support.
disable(1)
enable(2)
default: enable(2) | column | Enumeration | .1.3.6.1.4.1.2011.5.25.313.13.1.9 |