hwDslamNtvUserVideoFlowPara

Specifies the parameter value of the flow carrying the multicast video service. 
The parameter value varies with the flow type. In detail:
1. If the flow type is byUserVlan (1), the range of this parameter is 1-4095. 
If the flow type is untagged, this parameter is -1.
2. If the flow type is byEncap (2), the options of this parameter are ipv4oe(0), ipoe(1), pppoe(2) and ipv6oe(3).
3. If the flow type is by8021p (3), the range of this parameter is 0-7.
4. If the flow type is byUserVlanEtherType(4), the flow parameter is a combination 
of the EtherType and the user VLAN. The EtherType can be ipoe(1) or pppoe(2), 
and the user VLAN is in the range of 1-4095, 0 (priority-tagged), and untagged(-1). 
For the service flow of the byUserVlanEtherType(4) type, this leaf supports only reading, 
and does not support creation.
5. If the flow type is by8021pList(6), the flow parameter is a combination of the 802.1p list bitmap and 
C-VLAN (outer VLAN, 1-4095 or 0xFFFE). The C-VLAN value 0xFFFE indicates any VLAN.
In priorityMask, the most significant bit(23) represents the highest priority 7, and the least significant bit(16) 
represents the lowest priority 0. For example, if the PriorityMask is 0x05, the priority list is 0 and 2.
------------------------------------------------
 | bit31-bit24 | bit23-bit16   |   bit15-bit0 |
----------------------------------------------  
 |    Reserved | PriorityMask  |   VLAN ID    |
-----------------------------------------------

MIB

HUAWEI-DSLAM-NTV-MIB

OID

.1.3.6.1.4.1.2011.6.28.16.1.34

Type

column

Access

readwrite

Status

current

Parent

hwDslamNtvUserEntry