hwSubslotRowStatus

HUAWEI-DEVICE-MIB · .1.3.6.1.4.1.2011.6.3.3.3.1.10

MIB view Table view

Object

column r/w SNMPv2-TCRowStatus

Only the operation of adding a daughter board, that is, setting createAndGo(4),
is supported. When adding a daughter board, you must set the hwSubslotType object at the same time.
After you add a board by using the hwSlotAdminStatus object in hwSlotTable,
if the board allows you to add a daughter board and the board status (hwSlotOperStatus) is discovery(5),
you can add a daughter board in this way.

Context

MIB: HUAWEI-DEVICE-MIB
OID: .1.3.6.1.4.1.2011.6.3.3.3.1.10
Type: column
Access: readwrite
Status: current
Parent: hwSubslotEntry
Table: hwSubslotTable
Siblings: 15

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwSubslotIndex The index of a daughter board is determined by the physical position of the daughter board on the board. The hwSubslotIndex value of 65535 indicates the board itself.	column	Integer32	`.1.3.6.1.4.1.2011.6.3.3.3.1.1`
hwSubSlotPhySerialNum The vendor-specific serial number string for the daughter board. The preferred value is the serial number string actually printed on the component itself.	column	OctetString	`.1.3.6.1.4.1.2011.6.3.3.3.1.11`
hwSubslotTypeName daughter board type name in the subslot,refer to the HW-TC table.	column	OctetString	`.1.3.6.1.4.1.2011.6.3.3.3.1.12`
hwSubslotPrimaryStatus The primary status of the daughter board. Options: 1. isNr(1) -in Service, normal 2. isAnr(2) -in service, abnormal 3. isRst(3) -in service, restricted 4. isAnrst(4) -i…	column	Enumeration	`.1.3.6.1.4.1.2011.6.3.3.3.1.13`
hwSubslotSecondaryStatus The secondary status of the daughter board. This BITS structure can report the following status: 1. sstAins(0) -this bit position positively reports that the status of the daught…	column	Bits	`.1.3.6.1.4.1.2011.6.3.3.3.1.14`
hwSubslotCLEICode daughter board CLEI Code(COMMON LANGUAGE Location Identifier Code): Used to identify the location and the type of a telecommunication device. For the definition of the CLEI Code, …	column	OctetString	`.1.3.6.1.4.1.2011.6.3.3.3.1.15`
hwSubslotTemperature The temperature of the daughter board. (Unit:centigrade) The value 0X7FFFFFFF indicates invalid temperature.	column	centigrade SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.3.3.3.1.16`
hwSubslotCpuRate The cpu occupancy of the daughter board. The value -1 indicates invalid cpu occupancy.	column	Integer32	`.1.3.6.1.4.1.2011.6.3.3.3.1.17`
hwSubslotRamUseRate The memory occupancy of the daughter board. The value -1 indicates invalid memory occupancy.	column	Integer32	`.1.3.6.1.4.1.2011.6.3.3.3.1.18`
hwSubslotType For the definition of the daughter board type, refer to the HUAWEI-TC-MIB.mib. When adding a daughter board on a board, you need to specify the type of the daughter board and chec…	column	HUAWEI-TC-MIBHWSubPCBType	`.1.3.6.1.4.1.2011.6.3.3.3.1.2`
hwSubslotPorts The number of physical ports owned by the sub board.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.3.3.3.1.3`
hwSubslotOperStatus Operation status of the daughter board. Options: 1. uninstall(1) -indicates that the daughter board is not installed 2. normal(2) -indicates that the da…	column	Enumeration	`.1.3.6.1.4.1.2011.6.3.3.3.1.5`
hwSubslotAdminStatus Administration status of the daughter board in the subslot. This object is not used. Options: 1. nooperation(-1) -indicates the default state 2. disable(1) -indicates the d…	column	Enumeration	`.1.3.6.1.4.1.2011.6.3.3.3.1.7`
hwSubslotVersion daughter board version information, obtained from the version information about the board on which the daughter board is located. Refer to the hwSlotVersion in the hwSlotTable.	column	OctetString	`.1.3.6.1.4.1.2011.6.3.3.3.1.8`
hwSubSlotDesc The description about the daughter board. Do not support the setting operation.	column	OctetString	`.1.3.6.1.4.1.2011.6.3.3.3.1.9`