hwSubslotOperStatus
HUAWEI-DEVICE-MIB ·
.1.3.6.1.4.1.2011.6.3.3.3.1.5
Object
column
Enumeration
Operation status of the daughter board.
Options:
1. uninstall(1) -indicates that the daughter board is not installed
2. normal(2) -indicates that the daughter board is running normally
3. fault(3) -indicates that the daughter board is faulty
4. forbidden(4) -the object is not used
5. autofind(5) -indicates that the daughter board is in the autofind state.
6. config(6) -indicates that the daughter board is in the configuration state.
The daughter board is in the configuration state during data configuration.
After a daughter board is successfully configured, its status is changed from config(6)
to normal(2). If the configuration fails, the daughter board status is changed from config(6) to fault(3)
7. offline(7) -indicates that the daughter board is faulty and is not in position
8. abnormal(8) -indicates that the daughter board is abnormal
9. versionerr(9) -indicates that the daughter board version is error
10. autoload(10) -indicates that the daughter board is in the auto loading state. If detecting a software update,
the daughter board automatically loads the update. If a daughter board is in the auto loading state,
resetting or disabling the daughter board may fail
11. outofservice(11) -indicates that the daughter board is out of service
12. graceful(12) -indicates that the daughter board running state is graceful
13. shutdown(13) -indicates that the daughter board is in the shutdown state.
14. energysavingshutdown(14) -used for system energy saving. Reference to hwSysEnergySaving node for more detail.
15. hightempshutdown(15) -when the temperature of a daughter board exceeds the high temperature threshold,
the daughter board is powered off in order to protect the daughter board
16. manualshutdown(16) -services on certain daughter boards can be recovered only after restart of the daughter board.
You can manually power off the daughter board.
Then, the daughter board is in the manual shutdown state
17. mismatch(17) -when a daughter board inserted in a slot is inconsistent with the configuration saved in the system,
the daughter board is in the mismatch(17) state
18. acoffshutdown(18) -used to protect system when there is no AC Power.
Certain products use the power saving features, energysavingshutdown(14), hightempshutdown(15),
manualshutdown(16),acoffshutdown(18) to distinguish the shutdown causes.
Context
- MIB
- HUAWEI-DEVICE-MIB
- OID
.1.3.6.1.4.1.2011.6.3.3.3.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwSubslotEntry
- Table
- hwSubslotTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSubslotIndex The index of a daughter board is determined by the physical position of the daughter board on the board.
The hwSubslotIndex value of 65535 indicates the board itself. | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.3.1.1 |
| hwSubslotRowStatus Only the operation of adding a daughter board, that is, setting createAndGo(4),
is supported. When adding a daughter board, you must set the hwSubslotType object at the same time.… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.3.3.3.1.10 |
| hwSubSlotPhySerialNum The vendor-specific serial number string for the daughter board.
The preferred value is the serial number string
actually printed on the component itself. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.3.1.11 |
| hwSubslotTypeName daughter board type name in the subslot,refer to the HW-TC table. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.3.1.12 |
| hwSubslotPrimaryStatus The primary status of the daughter board.
Options:
1. isNr(1) -in Service, normal
2. isAnr(2) -in service, abnormal
3. isRst(3) -in service, restricted
4. isAnrst(4) -i… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.3.1.13 |
| hwSubslotSecondaryStatus The secondary status of the daughter board.
This BITS structure can report the following status:
1. sstAins(0) -this bit position positively reports that the status of the daught… | column | Bits | .1.3.6.1.4.1.2011.6.3.3.3.1.14 |
| hwSubslotCLEICode daughter board CLEI Code(COMMON LANGUAGE Location Identifier Code):
Used to identify the location and the type of a telecommunication device.
For the definition of the CLEI Code, … | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.3.1.15 |
| hwSubslotTemperature The temperature of the daughter board. (Unit:centigrade)
The value 0X7FFFFFFF indicates invalid temperature. | column | centigrade SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.3.1.16 |
| hwSubslotCpuRate The cpu occupancy of the daughter board.
The value -1 indicates invalid cpu occupancy. | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.3.1.17 |
| hwSubslotRamUseRate The memory occupancy of the daughter board.
The value -1 indicates invalid memory occupancy. | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.3.1.18 |
| hwSubslotType For the definition of the daughter board type, refer to the HUAWEI-TC-MIB.mib.
When adding a daughter board on a board, you need to specify the type of the daughter board and
chec… | column | HUAWEI-TC-MIBHWSubPCBType | .1.3.6.1.4.1.2011.6.3.3.3.1.2 |
| hwSubslotPorts The number of physical ports owned by the sub board. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.3.1.3 |
| hwSubslotAdminStatus Administration status of the daughter board in the subslot.
This object is not used.
Options:
1. nooperation(-1) -indicates the default state
2. disable(1) -indicates the d… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.3.1.7 |
| hwSubslotVersion daughter board version information, obtained from the version information about the
board on which the daughter board is located.
Refer to the hwSlotVersion in the hwSlotTable. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.3.1.8 |
| hwSubSlotDesc The description about the daughter board.
Do not support the setting operation. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.3.1.9 |