hwSlotWorkMode
HUAWEI-DEVICE-MIB ·
.1.3.6.1.4.1.2011.6.3.3.2.1.6
Object
column
r/w
Enumeration
Board working mode that describes whether the board is working in main state or in standby with loadshare, nullbackup, voice, satop state. Options: 1. main(1) - indicates that the active control board, supporting the get operation only 2. standby(2) - indicates that the standby control board, supporting the get operation only 3. loadshare(3) - indicates that the board working mode is load sharing 4. nullbackup(4) - indicates that the board working mode is backup 5. voice(5) - indicates to get and set the working mode of an EDT service board 6. satop(6) - indicates to get and set the working mode of an EDT service board or TOPB service board 7. pots(7) - indicates to get and set the working mode of an VDM service board 8. isdn(8) - indicates to get and set the working mode of an VDM service board 9. bonding(9) - indicates to get and set the working mode of an ADP service board 10. retransmission(10) - indicates to get and set the working mode of an ADP service board 11. nativetdm(11) - indicates to get and set the working mode of a TOPB service board 12. other(255) - indicates other working mode An EDT service board can be running either in voice mode, that is, voice(5), or in broadband mode, that is, satop(6). Setting the working mode of the EDT service board causes board resetting. An VDM service board can be running either in pots mode, that is, pots(7), or in isdn mode, that is, isdn(8). Setting the working mode of the VDM service board causes board resetting. Setting the board working mode may cause board resetting. When you are setting the working mode, you cannot set hwSlotAdminStatus or hwSlotRowStatus at the same time.
Context
- MIB
- HUAWEI-DEVICE-MIB
- OID
.1.3.6.1.4.1.2011.6.3.3.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwSlotEntry
- Table
- hwSlotTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSlotIndex A slot index is used to identify the location of a board in a shelf.
You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex.
For the hwFrameIndex object, refe… | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.1 |
| hwSlotRowStatus Supported setting operations are createAndGo(4) and destroy(6).
Options:
1. CreateAndGo(4) - When adding a board in offline mode, you must set the hwSlotType object at
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.3.3.2.1.10 |
| hwSlotPhySerialNum The vendor-specific serial number string for the board.
The preferred value is the serial number string actually printed on the component itself. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.11 |
| hwSlotShutdownState Shutdown state of the board.
Options:
1. powerOffState(1) -indicates the power-off state
2. powerOnState(2) -indicates the power-on state
This object is no longer used. | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.12 |
| hwSlotTemperature The temperature of the board. (Unit:centigrade)
The value 0X7FFFFFFF indicates invalid temperature. | column | centigrade SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.2.1.13 |
| hwSlotUpdateVersion The message is reported if the current version of a board is inconsistent with the
version saved in the flash memory.
The contents of the message are as follows:
Current BIOS vers… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.14 |
| hwSlotAdminForceOOSTime deprecated The timeout time before forcing to quit service of the board, in unit of minutes.
Range: 1-1440
Default: 0
Unit: minutes | column | minutes Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.15 |
| hwSlotForceOOSTime deprecated The remain time of the forcing to out of service.
Unit:Minute | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.16 |
| hwSlotAdminForceOOSTimeoutWorkMode deprecated The handling after the timeout time elapses when a board delays in quitting service.
Options:
1. forced(1) - force to handle
2. cancel(2) - cancel handling | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.17 |
| hwSlotEndServiceMode The mode in which a board quits service.
Options:
1. immediate(1) -quit service immediately
2. graceful(2) -quit service later | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.18 |
| hwSlotCLEICode Card CLEI Code(COMMON LANGUAGE Location Identifier Code):
Used to identify the location and the type of a telecommunication device.
For the definition of the CLEI Code, refer to t… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.19 |
| hwSlotType Board type, which is defined in HUAWEI-TC-MIB.mib.
The board type supported by a slot varies. For example, a slot can be inserted with a power board only,
but certain slots can be… | column | HUAWEI-TC-MIBHWPCBType | .1.3.6.1.4.1.2011.6.3.3.2.1.2 |
| hwSlotNetworkRole Indicates the network role of a board.
Options:
1. cascade(1) -indicates the subtending side, which is used for subtending and capturing certain protocol packets
2. network(2) -… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.20 |
| hwSlotTypeName Slot information description, to describe board name information of the slot. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.21 |
| hwSlotPrimaryStatus The primary status of the Board.
Options:
1. isNr(1) -in Service, normal
2. isAnr(2) -in service, abnormal
3. isRst(3) -in service, restricted
4. isAnrst(4) -in service… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.22 |
| hwSlotSecondaryStatus The secondary status of the board.
This BITS structure can report the following status:
1. sstAins(0) -this bit position positively reports that the status of the board is automa… | column | Bits | .1.3.6.1.4.1.2011.6.3.3.2.1.23 |
| hwSlotCreateTime This object is used for getting the time of adding or creating a board. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.3.3.2.1.24 |
| hwSlotPortNumWorkMode Indicates the port number working mode of a board.
The default value is portnumworkmode48(5).
Options:
1. portnumworkmode8(1) - Indicates that the board is in 8-chan… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.25 |
| hwSlotExtendedBiosPassword This object is used for setting the password of extended BIOS. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.26 |
| hwSlotItemCode The vendor-specific item code string for the board.
The preferred value is the item code string actually printed on the component itself. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.27 |
| hwConfigBoardName describe config board name information of the slot. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.28 |
| hwBasicBoardName describe basic board name information of the slot. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.29 |
| hwSlotDesc The description about the board, providing additional information about a board for users.
For example, you can set the services supported by the board as the description. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.3 |
| hwSlotPcbVersion deprecated The PCB version information of the board.
It has been discarded.
The information of PCB version and other versions are described in the hwSlotVersion. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.4 |
| hwSlotVersion The version information about the board.
Refer to the technical specifications of Huawei Technologies
Co., Ltd. Use the new-line character \n (ACSII 0x0A) to space
various version… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.5 |
| hwSubSlots The number of sub boards supported by the board. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.2.1.7 |
| hwSlotOperStatus The running status of a board.
Options:
1. null(1) -indicates that the board is null
2. normal(2) -indicates that the board is running normally
3. … | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.8 |
| hwSlotAdminStatus Board status management.
This object cannot be set simultaneously with hwSlotRowStatus or hwSlotWorkMode.
Options:
1. nooperation(-1) -default state of the system
2. disable(1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.9 |