hwSlotUpdateVersion
HUAWEI-DEVICE-MIB ·
.1.3.6.1.4.1.2011.6.3.3.2.1.14
Object
column
OctetString
The message is reported if the current version of a board is inconsistent with the version saved in the flash memory. The contents of the message are as follows: Current BIOS version of the board 3 bytes BIOS version of the board in the flash 3 bytes Current software version of the board 3 bytes Software version of the board in the flash memory 3 bytes
Context
- MIB
- HUAWEI-DEVICE-MIB
- OID
.1.3.6.1.4.1.2011.6.3.3.2.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwSlotEntry
- Table
- hwSlotTable
- Siblings
- 28
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSlotIndex A slot index is used to identify the location of a board in a shelf.
You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex.
For the hwFrameIndex object, refe… | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.1 |
| hwSlotRowStatus Supported setting operations are createAndGo(4) and destroy(6).
Options:
1. CreateAndGo(4) - When adding a board in offline mode, you must set the hwSlotType object at
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.3.3.2.1.10 |
| hwSlotPhySerialNum The vendor-specific serial number string for the board.
The preferred value is the serial number string actually printed on the component itself. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.11 |
| hwSlotShutdownState Shutdown state of the board.
Options:
1. powerOffState(1) -indicates the power-off state
2. powerOnState(2) -indicates the power-on state
This object is no longer used. | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.12 |
| hwSlotTemperature The temperature of the board. (Unit:centigrade)
The value 0X7FFFFFFF indicates invalid temperature. | column | centigrade SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.2.1.13 |
| hwSlotAdminForceOOSTime deprecated The timeout time before forcing to quit service of the board, in unit of minutes.
Range: 1-1440
Default: 0
Unit: minutes | column | minutes Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.15 |
| hwSlotForceOOSTime deprecated The remain time of the forcing to out of service.
Unit:Minute | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.16 |
| hwSlotAdminForceOOSTimeoutWorkMode deprecated The handling after the timeout time elapses when a board delays in quitting service.
Options:
1. forced(1) - force to handle
2. cancel(2) - cancel handling | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.17 |
| hwSlotEndServiceMode The mode in which a board quits service.
Options:
1. immediate(1) -quit service immediately
2. graceful(2) -quit service later | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.18 |
| hwSlotCLEICode Card CLEI Code(COMMON LANGUAGE Location Identifier Code):
Used to identify the location and the type of a telecommunication device.
For the definition of the CLEI Code, refer to t… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.19 |
| hwSlotType Board type, which is defined in HUAWEI-TC-MIB.mib.
The board type supported by a slot varies. For example, a slot can be inserted with a power board only,
but certain slots can be… | column | HUAWEI-TC-MIBHWPCBType | .1.3.6.1.4.1.2011.6.3.3.2.1.2 |
| hwSlotNetworkRole Indicates the network role of a board.
Options:
1. cascade(1) -indicates the subtending side, which is used for subtending and capturing certain protocol packets
2. network(2) -… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.20 |
| hwSlotTypeName Slot information description, to describe board name information of the slot. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.21 |
| hwSlotPrimaryStatus The primary status of the Board.
Options:
1. isNr(1) -in Service, normal
2. isAnr(2) -in service, abnormal
3. isRst(3) -in service, restricted
4. isAnrst(4) -in service… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.22 |
| hwSlotSecondaryStatus The secondary status of the board.
This BITS structure can report the following status:
1. sstAins(0) -this bit position positively reports that the status of the board is automa… | column | Bits | .1.3.6.1.4.1.2011.6.3.3.2.1.23 |
| hwSlotCreateTime This object is used for getting the time of adding or creating a board. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.3.3.2.1.24 |
| hwSlotPortNumWorkMode Indicates the port number working mode of a board.
The default value is portnumworkmode48(5).
Options:
1. portnumworkmode8(1) - Indicates that the board is in 8-chan… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.25 |
| hwSlotExtendedBiosPassword This object is used for setting the password of extended BIOS. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.26 |
| hwSlotItemCode The vendor-specific item code string for the board.
The preferred value is the item code string actually printed on the component itself. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.27 |
| hwConfigBoardName describe config board name information of the slot. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.28 |
| hwBasicBoardName describe basic board name information of the slot. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.29 |
| hwSlotDesc The description about the board, providing additional information about a board for users.
For example, you can set the services supported by the board as the description. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.3 |
| hwSlotPcbVersion deprecated The PCB version information of the board.
It has been discarded.
The information of PCB version and other versions are described in the hwSlotVersion. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.4 |
| hwSlotVersion The version information about the board.
Refer to the technical specifications of Huawei Technologies
Co., Ltd. Use the new-line character \n (ACSII 0x0A) to space
various version… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.5 |
| hwSlotWorkMode Board working mode that describes whether the board is
working in main state or in standby with loadshare, nullbackup, voice, satop state.
Options:
1. main(1) - in… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.6 |
| hwSubSlots The number of sub boards supported by the board. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.2.1.7 |
| hwSlotOperStatus The running status of a board.
Options:
1. null(1) -indicates that the board is null
2. normal(2) -indicates that the board is running normally
3. … | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.8 |
| hwSlotAdminStatus Board status management.
This object cannot be set simultaneously with hwSlotRowStatus or hwSlotWorkMode.
Options:
1. nooperation(-1) -default state of the system
2. disable(1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.9 |