hwSlotOperStatus
HUAWEI-DEVICE-MIB ·
.1.3.6.1.4.1.2011.6.3.3.2.1.8
Object
column
Enumeration
The running status of a board.
Options:
1. null(1) -indicates that the board is null
2. normal(2) -indicates that the board is running normally
3. fault(3) -indicates that the board is faulty but in position
4. forbidden(4) -indicates that the board is in position but disabled
5. autofind(5) -indicates that the board is in the autofind state. If a board is added through
hwSlotRowStatus and the board is not confirmed, the board is in the autofind state.
If a board is inserted in an idle slot, after the report of automatic registration,
the board is also in the autofind state
6. config(6) -indicates that the board is in the configuration state.
After a board that is in the auto discovery.
state is confirmed, data needs to be configured on the board.
The board is in the configuration state during data configuration.
After a board is successfully configured, its status is changed from config(6)
to normal(2). If the configuration fails, the board status is changed from config(6) to fault(3)
7. offline(7) -indicates that the board is faulty and is not in position
8. abnormal(8) -indicates that the board is abnormal
9. versionerr(9) -indicates that the board version is error
10. autoload(10) -indicates that the board is in the auto loading state. If detecting a software update,
the board automatically loads the update. If a board is in the auto loading state,
resetting or disabling the board may fail
11. outofservice(11) -indicates that the board is out of service
12. graceful(12) -indicates that the board running state is graceful
13. shutdown(13) -indicates that the board is in the shutdown state.
14. energysavingshutdown(14) -used for system energy saving. Reference to hwSysEnergySaving node for more detail.
15. hightempshutdown(15) -when the temperature of a board exceeds the high temperature threshold,
the board is powered off in order to protect the board
16. manualshutdown(16) -services on certain boards can be recovered only after restart of the board.
You can manually power off the board.
Then, the board is in the manual shutdown state
17. mismatch(17) -when a board inserted in a slot is inconsistent with the configuration saved in the system,
the board is in the mismatch(17) state
18. acoffshutdown(18) -used to protect system when there is no AC Power.
19. highpowershutdown(19) -used to protect system when the current maximum power consumption of the
system exceeds the maximum power supply capability
20. isolated(20) -used to indicates that the board is in isolated state
Certain products use the power saving features, energysavingshutdown(14), hightempshutdown(15),
manualshutdown(16),acoffshutdown(18),highpowershutdown(19) to distinguish the shutdown causes.
For outofservice(11), graceful(12), refer to hwSlotEndServiceMode.
Context
- MIB
- HUAWEI-DEVICE-MIB
- OID
.1.3.6.1.4.1.2011.6.3.3.2.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwSlotEntry
- Table
- hwSlotTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSlotIndex A slot index is used to identify the location of a board in a shelf.
You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex.
For the hwFrameIndex object, refe… | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.1 |
| hwSlotRowStatus Supported setting operations are createAndGo(4) and destroy(6).
Options:
1. CreateAndGo(4) - When adding a board in offline mode, you must set the hwSlotType object at
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.3.3.2.1.10 |
| hwSlotPhySerialNum The vendor-specific serial number string for the board.
The preferred value is the serial number string actually printed on the component itself. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.11 |
| hwSlotShutdownState Shutdown state of the board.
Options:
1. powerOffState(1) -indicates the power-off state
2. powerOnState(2) -indicates the power-on state
This object is no longer used. | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.12 |
| hwSlotTemperature The temperature of the board. (Unit:centigrade)
The value 0X7FFFFFFF indicates invalid temperature. | column | centigrade SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.2.1.13 |
| hwSlotUpdateVersion The message is reported if the current version of a board is inconsistent with the
version saved in the flash memory.
The contents of the message are as follows:
Current BIOS vers… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.14 |
| hwSlotAdminForceOOSTime deprecated The timeout time before forcing to quit service of the board, in unit of minutes.
Range: 1-1440
Default: 0
Unit: minutes | column | minutes Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.15 |
| hwSlotForceOOSTime deprecated The remain time of the forcing to out of service.
Unit:Minute | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.2.1.16 |
| hwSlotAdminForceOOSTimeoutWorkMode deprecated The handling after the timeout time elapses when a board delays in quitting service.
Options:
1. forced(1) - force to handle
2. cancel(2) - cancel handling | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.17 |
| hwSlotEndServiceMode The mode in which a board quits service.
Options:
1. immediate(1) -quit service immediately
2. graceful(2) -quit service later | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.18 |
| hwSlotCLEICode Card CLEI Code(COMMON LANGUAGE Location Identifier Code):
Used to identify the location and the type of a telecommunication device.
For the definition of the CLEI Code, refer to t… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.19 |
| hwSlotType Board type, which is defined in HUAWEI-TC-MIB.mib.
The board type supported by a slot varies. For example, a slot can be inserted with a power board only,
but certain slots can be… | column | HUAWEI-TC-MIBHWPCBType | .1.3.6.1.4.1.2011.6.3.3.2.1.2 |
| hwSlotNetworkRole Indicates the network role of a board.
Options:
1. cascade(1) -indicates the subtending side, which is used for subtending and capturing certain protocol packets
2. network(2) -… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.20 |
| hwSlotTypeName Slot information description, to describe board name information of the slot. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.21 |
| hwSlotPrimaryStatus The primary status of the Board.
Options:
1. isNr(1) -in Service, normal
2. isAnr(2) -in service, abnormal
3. isRst(3) -in service, restricted
4. isAnrst(4) -in service… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.22 |
| hwSlotSecondaryStatus The secondary status of the board.
This BITS structure can report the following status:
1. sstAins(0) -this bit position positively reports that the status of the board is automa… | column | Bits | .1.3.6.1.4.1.2011.6.3.3.2.1.23 |
| hwSlotCreateTime This object is used for getting the time of adding or creating a board. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.3.3.2.1.24 |
| hwSlotPortNumWorkMode Indicates the port number working mode of a board.
The default value is portnumworkmode48(5).
Options:
1. portnumworkmode8(1) - Indicates that the board is in 8-chan… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.25 |
| hwSlotExtendedBiosPassword This object is used for setting the password of extended BIOS. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.26 |
| hwSlotItemCode The vendor-specific item code string for the board.
The preferred value is the item code string actually printed on the component itself. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.27 |
| hwConfigBoardName describe config board name information of the slot. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.28 |
| hwBasicBoardName describe basic board name information of the slot. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.29 |
| hwSlotDesc The description about the board, providing additional information about a board for users.
For example, you can set the services supported by the board as the description. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.3 |
| hwSlotPcbVersion deprecated The PCB version information of the board.
It has been discarded.
The information of PCB version and other versions are described in the hwSlotVersion. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.4 |
| hwSlotVersion The version information about the board.
Refer to the technical specifications of Huawei Technologies
Co., Ltd. Use the new-line character \n (ACSII 0x0A) to space
various version… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.2.1.5 |
| hwSlotWorkMode Board working mode that describes whether the board is
working in main state or in standby with loadshare, nullbackup, voice, satop state.
Options:
1. main(1) - in… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.6 |
| hwSubSlots The number of sub boards supported by the board. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.2.1.7 |
| hwSlotAdminStatus Board status management.
This object cannot be set simultaneously with hwSlotRowStatus or hwSlotWorkMode.
Options:
1. nooperation(-1) -default state of the system
2. disable(1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.2.1.9 |