hwDevElevation
HUAWEI-DEVICE-MIB ·
.1.3.6.1.4.1.2011.6.3.1.34
Object
scalar
r/w
Integer32
The elevation of the device, in unit of meters. The value 32767 indicates invalid elevation.
Context
- MIB
- HUAWEI-DEVICE-MIB
- OID
.1.3.6.1.4.1.2011.6.3.1.34- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwSystemPara
- Siblings
- 59
Syntax
Integer32
Values & Constraints
Object Constraints
range: -32768-32767
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSysIpAddr IP address of the system.
It'd better not to modify this address when out-band NMS is used.
It will take no effect to separately configure IP address or IP address mask. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.3.1.1 |
| hwSysWorkScenario System work scenario.
Used to identify whether the control board is in the upgrade(2)
or normal(1) scenario.
Options:
1. normal(1) -the normal scene of the system.
I… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.10 |
| hwSysTemperatureHighThreshold The threshold of the system.
When you set a high temperature threshold, you also need to set a low temperature threshold.
Range:40~105
The invalid value is 65535.If the threshold … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.1.11 |
| hwSysTemperatureLowThreshold The threshold of the system.
When you set a low temperature threshold, you also need to set a high temperature threshold.
Range:-40~20
The invalid value is 65535.If the threshold … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.1.12 |
| hwSysExchangeMode System Exchange-Mode,
Options:
1. backup(1) -indicates active/standby mode. Two control boards serve as the active and standby control
boards res… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.13 |
| hwSysActivePatch Display the information of the active patches in current system. | scalar | OctetString | .1.3.6.1.4.1.2011.6.3.1.14 |
| hwSysDeactivePatch This object is used for querying the information about the deactivated patch in the current system. | scalar | OctetString | .1.3.6.1.4.1.2011.6.3.1.15 |
| hwSystemAutoConfigStatus GE uplink software commissioning free configuration.
Options:
1.enable(1) -the default value is enable
2.disable(2) -this object is no longer used | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.16 |
| hwSystemEnergySavingSwitch The energy-saving mode of system.
Options:
1.basic(1) -when it is set to basic(1), the system energy saving mode is basic mode.
2.deep(2) -when it is set to deep(2), the system en… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.17 |
| hwSysEncoding The encoding mode of characters in the system.
Options:
1. default(1) -indicates that the encoding mode is no set
2. gbk(2) -indicates that the encoding mode of characters… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.18 |
| hwSysUpdateBoardVersion Update Board Version
Options:
1.updateBoardVersion(1) -set operation only | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.19 |
| hwSysIpMask IP address mask of the system.
This object can take effect only when hwSysIpAddr is also set. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.3.1.2 |
| hwSysUpdateBoardMaxTimeLen Update Board Version Max Time Len | scalar | Integer32 | .1.3.6.1.4.1.2011.6.3.1.20 |
| hwSystemAdminStateMode System admin state mode.
DEFVAL { private }
Options:
1.grStandard(1) -grStandard mode complies with GR series standard(such as GR-1093, used in North America).
2.private(2) … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.21 |
| hwSystemAdminStatus The system admin status.
Options:
1. nooperation(-1) -default state of the system.
2. is(1) -in service
3. oos(2) -out of service | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.22 |
| hwSystemPrimaryStatus The system primary status.
Options:
1. isNr(1) -in Service, normal
2. isAnr(2) -in service, abnormal
3. isRst(3) -in service, restricted
4. isAnrst(4) -in service, abno… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.23 |
| hwDeviceArchType The hardware structure type of a device.
Currently, the hardware structure types of the existing versions are as follows:
Options:
1.arch1(1) -in MxUV8R305, the hardware structur… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.24 |
| hwUplinkSysIPAddr The IP address of the uplink system of PVM, it is only used when PVM worked in integrated mode
and the IPM worked as the uplink board. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.3.1.25 |
| hwSysMainBoardTypeDesc The mainboard description. | scalar | OctetString | .1.3.6.1.4.1.2011.6.3.1.26 |
| hwSysEnergySaving The automatic energy saving function consists of seven sub-functions, which are indicated by bits .All bits are disabled by default. If
a bit is 0, the represented function is dis… | scalar | Bits | .1.3.6.1.4.1.2011.6.3.1.27 |
| hwSysSceneMode The device work scene.
Options:
1. olt(1) -work in OLT scene
2. msan(3) -work in MSAN scene | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.28 |
| hwSysFtpXmlConfigure The state of XML file.
Options:
1. useful(1) -Xml file is useful
2. useless(2) -Xml file is useless | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.29 |
| hwSysVersion The system software version format is consistent with the
specification of HUAWEI product.For example, MA5600V800R008C00. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.6.3.1.3 |
| hwSysCentralizedMgmtPrimary The primary mode for centralized management.
Options:
1. extendFrame(1) -Extended frame management
2. standAlone(2) -Stand alone management | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.30 |
| hwUpgradeVerifyVersion The system software version used in update scene for HUAWEI product.For example, MA5600V800R008C00. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.6.3.1.31 |
| hwDevLongitude The longitude of the device.
The value expands 100000 times and the value 2147483647 indicates invalid longitude. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.3.1.32 |
| hwDevLatitude The latitude of the device.
The value expands 100000 times and the value 2147483647 indicates invalid latitude. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.3.1.33 |
| hwDevHorizontalErr The horizontal error of the device, in unit of meters.
The value 4294967295 indicates invalid horizontal error. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.3.1.35 |
| hwDevAltitudeErr The altitude error of the device, in unit of meters.
The value 4294967295 indicates invalid altitude error. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.3.1.36 |
| hwDevAreaCode The area code of the device.
The length of area code is 12. The characters can be 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9.
The zero-length string indicates invalid area code. | scalar | OctetString | .1.3.6.1.4.1.2011.6.3.1.37 |
| hwDevGisTimeStamp The time stamp of the measurement signature, which is the number of seconds from 00:00 on January 1, 1970 to the current time.
The value 4294967295 indicates invalid time stamp. | scalar | Unsigned32 | .1.3.6.1.4.1.2011.6.3.1.38 |
| hwDevGisDigest The check value of the measurement signature.
The length of check value is 16. The characters can be 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E and F.
The zero-length string indi… | scalar | OctetString | .1.3.6.1.4.1.2011.6.3.1.39 |
| hwSysTime This object is used for getting or setting current date and time of the system. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.3.1.4 |
| hwDevGisCheckCode The check code of the device GPS information.
The length of check code is 4. The characters can be 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E and F.
The zero-length string indica… | scalar | OctetString | .1.3.6.1.4.1.2011.6.3.1.40 |
| hwSysSsdSwitch The secure software downloading status.
Options:
1. enable(1) -The secure software downloading is enable
2. disable(2) -The secure software downloading is disable | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.41 |
| hwSysFtpMode FTP connection mode.
Options:
1. port(1) -Set the FTP connection mode to port.
2. passive(2) -Set the FTP connection mode to passive.
Default: port(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.42 |
| hwSysMarketScene The device options:
1. carrier(1) -Device work in carrier scene.
2. enterprise(2) -Device work in enterprise scene.
Default: carrier(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.43 |
| hwDeviceCountryCode 1. china(1) -Device of china.
2. oversea(2) -Device of oversea.
Default: oversea(2) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.44 |
| hwSysDeviceNameMode 1. simple(1) -Simplified device name.
2. detail(2) -Detailed device name.
Default: simple(1) | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.45 |
| hwXponWorkMode The gpon work mode.
Options:
1. gpon(1) -gpon workmode
2. combopon(2) -combopon workmode
3. invalid(3) -invalid value
Default is combopon. | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.46 |
| hwVsManageMode Virtual system management mode.
Options:
1. multiIP(1) -Set the virtual system multi-ip mode.
2. singleIP(2) -Set the virtual system single-ip mode.
The default value multi-ip(… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.47 |
| hwSysIpv6Addr IPV6 address of the system. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.6.3.1.48 |
| hwSysIpv6Mask IPV6 Mask of the system. | scalar | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.2011.6.3.1.49 |
| hwSysWorkMode This object is used for obtaining the working mode of the UA5000.
Options:
1. amsanamsan(1) -indicates that the active and standby control boards are in position,
… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.5 |
| hwSysFtpRemoteOverwrite Ftp overwrite remote file strategy.
Options:
1. enable(1) -Overwrite remote file while file with the same name exists on the FTP server.
2. disable(2) -Do not overwrite remote… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.50 |
| hwSysSftpRemoteOverwrite Sftp overwrite remote file strategy.
Options:
1. enable(1) -Overwrite remote file while file with the same name exists on the SFTP server.
2. disable(2) -Do not overwrite remo… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.51 |
| hwWarrantyInfoProductCapability Whether the current product supports for warranty information.
Options:
1. support(1) - indicates that the product is support
2. notsupport(2) - indicates that the product… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.52 |
| hwSysSecConfig Used only for CICM to collect security configuration data. | scalar | OctetString | .1.3.6.1.4.1.2011.6.3.1.53 |
| hwSystemRole The current role in the network. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.6.3.1.54 |
| hwMiniSystemSwitch Mini system switch status.
Options:
1. disable(0) -indicates that the mini-system switch is disable.
2. enable(1) -indicates that the mini-system switch is enable.
The defaul… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.55 |
| hwSysEosTime This object is used for getting eos date and time of the system. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.3.1.56 |
| hwSingleControlBoardMode Single control board mode switch status.
Options:
1. disable(0) -indicates that the single control board mode is disable.
2. enable(1) -indicates that the single control boar… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.57 |
| hwDevExtendedFrameTypes Show the types of extended frame and main board supported by the system. | scalar | OctetString | .1.3.6.1.4.1.2011.6.3.1.58 |
| hwDeviceCountryCodeInfo The country code of mainboard.
Options:
1. america(1) -Mainboard currently runs in America.
2. china(86) -Mainboard currently runs in China.
3. others(999) -Mainboard curren… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.3.1.59 |
| hwSysAverageBufferUsed Query the average memory usage of the system.
Collect the sum of the memory usage of all the boards that
support memory query in the system, and then calculate the
average value. … | scalar | Integer32 | .1.3.6.1.4.1.2011.6.3.1.6 |
| hwSysRsvedVlan Describes the start VLAN ID of the reserved VLANs currently used by the system.
Default: 4079
The system automatically uses the 15 VLANs starting from the configured start VLAN ID… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.3.1.7 |
| hwSysRsvedVlanDb Describes the start VLAN ID of the reserved VLANs configured in the system.
The configuration takes effect after system restart.
Range: 2-4079
Default: 4079
The system automatical… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.3.1.8 |
| hwIopacketVersion The version information in the IO package, which is consistent
with the system version information. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.6.3.1.9 |
| hwSysVersionVrcb The device MIB build version, used by NMS for MIB adaption. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.6.3.1.999 |