hwVoltFallingAlarm
HUAWEI-BASE-TRAP-MIB ·
.1.3.6.1.4.1.2011.5.25.129.2.2.11
Object
notification
This object indicates that an alarm is generated when the voltage sensor exceeds the lower threshold.
Context
- MIB
- HUAWEI-BASE-TRAP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.129.2.2.11- Type
- notification
- Status
- current
- Parent
- hwEnvironmentTrap
- Siblings
- 22
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwTempRisingAlarm This object indicates that an alarm is generated when the temperature sensor exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.1 |
| hwVoltRisingResume This object indicates that the alarm generated when the voltage sensor exceeds the upper threshold is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.10 |
| hwVoltFallingResume This object indicates that the alarm generated when the voltage sensor exceeds the lower threshold is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.12 |
| hwCurrentRisingAlarm Current rise over HIGH threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.13 |
| hwCurrentRisingResume Current back to normal level. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.14 |
| hwCurrentFallingAlarm Current fall below LOW threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.15 |
| hwCurrentFallingResume Current back to normal level. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.16 |
| hwPowerRisingAlarm Photoelectric power rise over HIGH threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.17 |
| hwPowerRisingResume Photoelectric power back to normal level. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.18 |
| hwPowerFallingAlarm Photoelectric power fall below LOW threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.19 |
| hwTempRisingResume This object indicates that the alarm generated when the temperature sensor exceeds the upper threshold is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.2 |
| hwPowerFallingResume Photoelectric power back to normal level. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.20 |
| hwPowerInsufficiencyAlarm The available power of device is not enough for the board. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.21 |
| hwPowerInsufficiencyResume The available power of device becomes sufficient for the board. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.22 |
| hwAcuSoftwareUpgradeFailure ACU current startup system software and next startup system software are difference. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.23 |
| hwTempFallingAlarm Temperature fall below LOW threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.3 |
| hwTempFallingResume Temperature back to normal level. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.4 |
| hwHumidityRisingAlarm Humidity rise over HIGH threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.5 |
| hwHumidityRisingResume Humidity back to normal level. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.6 |
| hwHumidityFallingAlarm Humidity fall below LOW threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.7 |
| hwHumidityFallingResume Humidity back to normal level. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.8 |
| hwVoltRisingAlarm This object indicates that an alarm is generated when the voltage sensor exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.129.2.2.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwBaseTrapSeverity To describe the level of trap. | scalar | ITU-ALARM-TC-MIBItuPerceivedSeverity | .1.3.6.1.4.1.2011.5.25.129.1.1 |
| hwBaseTrapProbableCause To describe the probable cause of trap. | scalar | IANA-ITU-ALARM-TC-MIBIANAItuProbableCause | .1.3.6.1.4.1.2011.5.25.129.1.2 |
| hwBaseTrapEventType To describe the type of trap. | scalar | IANA-ITU-ALARM-TC-MIBIANAItuEventType | .1.3.6.1.4.1.2011.5.25.129.1.3 |
| ENTITY-MIBentPhysicalName The textual name of the physical entity. The value of this
object should be the name of the component as assigned by
the local device and should be suitable for use in commands
e… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.47.1.1.1.1.7 |
| hwBaseThresholdValue The current value that been measured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.129.1.6.1.3 |
| hwBaseThresholdUnit The unit for this threshold value.
percentage(1) ---unit for humidity
centigrade1(2) ---unit for temperature
centigrade2(3) ---… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.129.1.6.1.4 |
| hwBaseThresholdLowCritical The critical alarm threshold for falling alarm. It could be used
for a more dangerous instance than hwBaseThresholdLowWarning.
It should be equal to hwBaseThreshold… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.129.1.6.1.5 |
| hwBaseThresholdLowWarning The normal warning threshold for falling alarm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.129.1.6.1.6 |