hwPortPhysicalDownReason

AUAIS: The RX detects administrative(A) unit(U) alarm(A) indication(I) signal(S).
B1TCA: The RX detects b1(B1) threshold(T) crossing(C) alarm(A).
B2TCA: The RX detects b2(B2) threshold(T) crossing(C) alarm(A).
B3TCA: The RX detects b3(B3) threshold(T) crossing(C) alarm(A).
LAIS: The RX detects line(L) alarm(A) indication(I) signal(S).
LCD: The RX detects loss(L) of code-group(C) delineation(D).
LOF: The RX detects loss(L) of(O) frame(F).
LOM: The RX detects loss(L) of(O) multiframe(M).
LOP: The RX detects loss(L) of(O) pointer(M).
LOS: The RX detects loss(L) of(O) signal(S).
LRDI: The RX detects line(L) remote(R) defect(D) indication(I).
LREI: The RX detects line(L) remote(R) error(D) indication(I).
OOF: The RX detects out(O) of(O) frame(F).
PAIS: The RX detects path(P) alarm(A) indication(I) signal(S).
PPLM: The RX detects path(P) payload(P) label(L) mismatch(M).
PRDI: The RX detects path(P) remote(R) defect(D) indication(I).
PREI: The RX detects path(P) remote(R) error(E) indication(I).
PUNEQ: The RX detects path(P) unequipped(UNEQ).
RDOOL: The RX detects receive(R) data(D) out(O) of(O) lock(L).
RROOL: The RX detects receive(R) reference(R) out(O) of(O) lock(L).
SD: The RX detects signal(S) degrade(D).
SF: The RX detects signal(S) fail(F).
TROOL: The TX detects transmit(T) reference(R) out(O) of(O) lock(L).
WLINK: The RX detects pcs link has failed (wis mode).
TRANSCEIVER_OFFLINE: The transceiver is not in position.
TRANSCEIVER_FAIL: A hardware failure occurs when accessing the transceiver.
TRANSCEIVER_MISMATCH: The transceiver does not match the port-mode.
TRANSCEIVER_UNKNOWN: The transceiver is unknown type.
PMA_LOS: The PMA(physical medium attachment) detects loss of signal.
PMA_UNLOCK: The PMA(physical medium attachment) detects receive data out of lock.
PCS_HIGHBER: The PCS(physical coding sublayer) enter High-BER status.
PCS_UNLOCK: The PCS(physical coding sublayer) detects receive data out of lock.
LOCAL_FAULT: The RX detects Local Fault signal.
REMOTE_FAULT: The RX detects Remote Fault signal.
NEGOTIATION_FAIL: Auto-negotiation is not successful.
SOFT_FORCE_DOWN: The interface was DOWN triggered by a protocol module or was administratively shut down.

MIB

HUAWEI-BASE-TRAP-MIB

OID

.1.3.6.1.4.1.2011.5.25.129.1.17

Type

scalar

Access

notifyonly

Status

current

Parent

hwBaseTrapObject