hwAdslnniLineEntry
HUAWEI-ADSLNNI-MIB ·
.1.3.6.1.4.1.2011.6.143.1.1.3.1
Object
row
The table hwAdslnniLineTable contains configuration, commands, and status parameters of the ADSL2 line. The index of this entry is an interface index where the interface has an ifType of adslnni.
Context
- MIB
- HUAWEI-ADSLNNI-MIB
- OID
.1.3.6.1.4.1.2011.6.143.1.1.3.1- Type
- row
- Status
- current
- Parent
- hwAdslnniLineTable
- Table
- hwAdslnniLineTable
- Children
- 19
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAdslnniLineStatusAtuTransSys The ATU Transmission System (ATS) in use.
It is coded in a bit-map representation with only a single bit
set to '1' (the selected coding for the ADSL line). This
parameter may be… | column | ADSL2-LINE-TC-MIBAdsl2TransmissionModeType | .1.3.6.1.4.1.2011.6.143.1.1.3.1.1 |
| hwAdslnniLineStatusSigAttenDs The measured difference in the total power transmitted by the
ATU-C and the total power received by the ATU-R over all sub-
carriers during Showtime. It ranges from 0 to 1270 uni… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.10 |
| hwAdslnniLineStatusSigAttenUs The measured difference in the total power transmitted by the
ATU-R and the total power received by the ATU-C over all sub-
carriers during Showtime. It ranges from 0 to 1270 uni… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.11 |
| hwAdslnniLineStatusSnrMarginDs Downstream SNR Margin is the maximum increase in dB of the
noise power received at the ATU-R, such that the BER
requirements are met for all downstream bearer channels. It
ranges… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.12 |
| hwAdslnniLineStatusSnrMarginUs Upstream SNR Margin is the maximum increase in dB of the noise
power received at the ATU-C, such that the BER requirements
are met for all downstream bearer channels. It ranges f… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.13 |
| hwAdslnniLineStatusAttainableRateDs Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by
the ATU-C transmitter and the ATU-R receiver, coded in
bits/second. | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.14 |
| hwAdslnniLineStatusAttainableRateUs Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the
ATU-R transmitter and the ATU-C receiver, coded in
bits/second. | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.15 |
| hwAdslnniLineStatusActPsdDs Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB
(physical… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.16 |
| hwAdslnniLineStatusActPsdUs Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (physical values… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.17 |
| hwAdslnniLineStatusActAtpDs Actual Aggregate Transmit Power Downstream. The total amount
of transmit power delivered by the ATU-C at the U-C reference
point, at the instant of measurement. It ranges from -… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.18 |
| hwAdslnniLineStatusActAtpUs Actual Aggregate Transmit Power Upstream. The total amount of
transmit power delivered by the ATU-R at the U-R
reference point, at the instant of measurement. It ranges
from -31… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.19 |
| hwAdslnniLineStatusPwrMngState The current power management state.
Options:
1. L0(1) - Synchronized and full transmission (i.e., Showtime).
2. L1(2) - Low Power with reduced net data rate (G.992.2 only).
3. L2… | column | ADSL2-LINE-TC-MIBAdsl2PowerMngState | .1.3.6.1.4.1.2011.6.143.1.1.3.1.2 |
| hwAdslnniLineStatusInitResult Indicates the result of the last full initialization performed
on the line.
Options:
1. noFail(0) -Indicates that no abnormity occurs.
2. configError(1) -Indic… | column | ADSL2-LINE-TC-MIBAdsl2InitResult | .1.3.6.1.4.1.2011.6.143.1.1.3.1.3 |
| hwAdslnniLineStatusLastStateDs The last successful transmitted initialization state in
the downstream direction in the last full initialization
performed on the line. | column | ADSL2-LINE-TC-MIBAdsl2LastTransmittedState | .1.3.6.1.4.1.2011.6.143.1.1.3.1.4 |
| hwAdslnniLineStatusLastStateUs The last successful transmitted initialization state in the
upstream direction in the last full initialization performed
on the line. | column | ADSL2-LINE-TC-MIBAdsl2LastTransmittedState | .1.3.6.1.4.1.2011.6.143.1.1.3.1.5 |
| hwAdslnniLineStatusAtur Indicates current state (existing failures) of the ATU-R.
This is a bit-map of possible conditions. | column | ADSL2-LINE-TC-MIBAdsl2LineStatus | .1.3.6.1.4.1.2011.6.143.1.1.3.1.6 |
| hwAdslnniLineStatusAtuc Indicates current state (existing failures) of the ATU-C.
This is a bit-map of possible conditions. | column | ADSL2-LINE-TC-MIBAdsl2LineStatus | .1.3.6.1.4.1.2011.6.143.1.1.3.1.7 |
| hwAdslnniLineStatusLnAttenDs The measured difference in the total power transmitted by the
ATU-C and the total power received by the ATU-R over all sub-
carriers during diagnostics mode and initialization. I… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.8 |
| hwAdslnniLineStatusLnAttenUs The measured difference in the total power transmitted by the
ATU-R and the total power received by the ATU-C over all sub-
carriers during diagnostics mode and initialization.
It… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.143.1.1.3.1.9 |