hpnicfdot1dStpTransLimit
HPN-ICF-LswRSTP-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.5
Object
column
r/w
Integer32
Packet transmission limit of the bridge in a duration of Hello Time.
Context
- MIB
- HPN-ICF-LswRSTP-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfdot1dStpPortXEntry
- Table
- hpnicfdot1dStpPortXTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfdot1dStpPortStatus RSTP status of the port | column | EnabledStatus | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.1 |
| hpnicfdot1dStpRXRSTPBPDU Number of RSTP BPDU received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.10 |
| hpnicfdot1dStpTXRSTPBPDU Number of RSTP BPDU transmitted | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.11 |
| hpnicfdot1dStpClearStatistics Clear RSTP statistics. Read operation not supported. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.12 |
| hpnicfdot1dSetStpDefaultPortCost Set PathCost back to the default setting. Read operation not supported. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.13 |
| hpnicfdot1dStpRootGuard If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled. | column | EnabledStatus | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.14 |
| hpnicfdot1dStpLoopGuard Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out. | column | EnabledStatus | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.15 |
| hpnicfdot1dStpPortBlockedReason Record the block reason of the port.
notBlock (1) means that the port is not in block state,.
blockForProtocol (2) means that the port is blocked by stp protocol to avoid … | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.16 |
| hpnicfdot1dStpRXTCBPDU The number of received TC BPDUs | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.17 |
| hpnicfdot1dStpPortSendingBPDUType Type of BPDU which the port is sending. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.18 |
| hpnicfdot1dStpOperPortPointToPoint This object indicates whether the port
has connected to a point-to-point link or not.
The administrative value should be read from hpnicfdot1dStpPortPointToPoint. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.19 |
| hpnicfdot1dStpPortEdgeport Whether the port can be an edge port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.2 |
| hpnicfdot1dStpPortPointToPoint It is the administrative value indicates whether the port
can be connected to a point-to-point link or not.
If the value is 'auto', the operative value of a point-t… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.3 |
| hpnicfdot1dStpMcheck Check if the port transfer state machine enters | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.4 |
| hpnicfdot1dStpRXStpBPDU Number of STP BPDU received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.6 |
| hpnicfdot1dStpTXStpBPDU Number of STP BPDU transmitted | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.7 |
| hpnicfdot1dStpRXTCNBPDU Number of TCN BPDU received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.8 |
| hpnicfdot1dStpTXTCNBPDU Number of TCN BPDU transmitted | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.9 |