hpnicfdot1dStpPortBlockedReason

HPN-ICF-LswRSTP-MIB · .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.16
MIB view Table view

Object

column Enumeration 
Record the block reason of the port.
notBlock         (1) means that the port is not in block state,.
blockForProtocol (2) means that the port is blocked by stp protocol to avoid loop.
blockForRootGuard(3) means that the root guard flag of bridge is set and a better message received from the port,and the port is blocked.
blockForBPDUGuard(4) means that the port has been configured as an edge port and receive a BPDU and thus blocked.
blockForLoopGuard(5) means that the port is blocked for loopguarded.

Context

MIB
HPN-ICF-LswRSTP-MIB
OID
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.16
Type
column
Access
readonly
Status
current
Parent
hpnicfdot1dStpPortXEntry
Table
hpnicfdot1dStpPortXTable
Siblings
18

Syntax

Enumeration

Values & Constraints

Enumerated Values
1notBlock
2blockForProtocol
3blockForRootGuard
4blockForBPDUGuard
5blockForLoopGuard

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpnicfdot1dStpPortStatus
RSTP status of the port
columnEnabledStatus.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.1
hpnicfdot1dStpRXRSTPBPDU
Number of RSTP BPDU received
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.10
hpnicfdot1dStpTXRSTPBPDU
Number of RSTP BPDU transmitted
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.11
hpnicfdot1dStpClearStatistics
Clear RSTP statistics. Read operation not supported.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.12
hpnicfdot1dSetStpDefaultPortCost
Set PathCost back to the default setting. Read operation not supported.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.13
hpnicfdot1dStpRootGuard
If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled.
columnEnabledStatus.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.14
hpnicfdot1dStpLoopGuard
Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out.
columnEnabledStatus.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.15
hpnicfdot1dStpRXTCBPDU
The number of received TC BPDUs
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.17
hpnicfdot1dStpPortSendingBPDUType
Type of BPDU which the port is sending.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.18
hpnicfdot1dStpOperPortPointToPoint
This object indicates whether the port has connected to a point-to-point link or not. The administrative value should be read from hpnicfdot1dStpPortPointToPoint.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.19
hpnicfdot1dStpPortEdgeport
Whether the port can be an edge port
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.2
hpnicfdot1dStpPortPointToPoint
It is the administrative value indicates whether the port can be connected to a point-to-point link or not. If the value is 'auto', the operative value of a point-t…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.3
hpnicfdot1dStpMcheck
Check if the port transfer state machine enters
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.4
hpnicfdot1dStpTransLimit
Packet transmission limit of the bridge in a duration of Hello Time.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.5
hpnicfdot1dStpRXStpBPDU
Number of STP BPDU received
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.6
hpnicfdot1dStpTXStpBPDU
Number of STP BPDU transmitted
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.7
hpnicfdot1dStpRXTCNBPDU
Number of TCN BPDU received
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.8
hpnicfdot1dStpTXTCNBPDU
Number of TCN BPDU transmitted
columnSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.9