hpnicfRedirectToModifiedVlanID
HPN-ICF-LswQos-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.25
Object
The new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional.
Context
- MIB
- HPN-ICF-LswQos-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfRedirectEntry
- Table
- hpnicfRedirectTable
- Siblings
- 24
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfRedirectAclIndex Index of acl rule. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.1 |
| hpnicfRedirectLinkAclRule The subitem of the link acl. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.10 |
| hpnicfRedirectToCpu Redirect to cpu. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.11 |
| hpnicfRedirectToIfIndex The ifIndex of port to be redirect to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.12 |
| hpnicfRedirectToNextHop1 | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.13 |
| hpnicfRedirectToNextHop2 | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.14 |
| hpnicfRedirectRuntime Is run or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.15 |
| hpnicfRedirectRowStatus RowStatus, now support three status: createAndGo, active, destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.16 |
| hpnicfRedirectToSlotNo The slot number to process redirection. Default value is 15.
When L3plus function is not supported, the default value would be set.
For L3plus redirection function, it is necessar… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.17 |
| hpnicfRedirectRemarkedDSCP DSCP of Policy-Based Routing. When L3plus function is not supported,
the default value would be set.
For L3plus redirection function, it is optional. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.18 |
| hpnicfRedirectRemarkedPri The priority of the redirect packet. When L3plus function is not supported,
the default value would be set.
For L3plus redirection function, it is optional. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.19 |
| hpnicfRedirectIfIndex ifIndex of port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.2 |
| hpnicfRedirectRemarkedTos The TOS of the redirect packet.
When L3plus function is not supported, the default value would be set.
For L3plus redirection function, it is optional. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.20 |
| hpnicfRedirectToNextHop3 The third IP address for PBR. Default value is 0xffffffff.
When L3plus function is not supported, the default value would be set.
The data stream can be redirected to three nextho… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.21 |
| hpnicfRedirectTargetVlanID The destination vlan ID for PBR. Default value is 0.
When L3plus function is not supported, the default value would be set.
For L3plus redirection function, it is necessary when n… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.22 |
| hpnicfRedirectMode The node denotes the strategy adopted by the PBR.
If strict-priority is configured, the most preferential IP address
is use as redirected nexthop.
If the mode is load-balance, any… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.23 |
| hpnicfRedirectToNestedVlanID The nested vlan ID inserted before the original vlan tag. Default value is 0.
When the function is not supported, the default value would be set.
It is optional. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.24 |
| hpnicfRedirectVlanID Vlan ID. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.3 |
| hpnicfRedirectDirection Direction of data stream. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.4 |
| hpnicfRedirectUserAclNum The number of the user acl. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.5 |
| hpnicfRedirectUserAclRule The subitem of the user acl. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.6 |
| hpnicfRedirectIpAclNum The num of the IP acl. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.7 |
| hpnicfRedirectIpAclRule The subitem of the IP acl. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.8 |
| hpnicfRedirectLinkAclNum The num of the link acl. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.9 |