hpnicfRateLimitConformCos
HPN-ICF-LswQos-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.25
Object
column
r/w
Integer32
If the user choose remark-cos value of the hpnicfRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)
Context
- MIB
- HPN-ICF-LswQos-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfRateLimitEntry
- Table
- hpnicfRateLimitTable
- Siblings
- 28
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-7
range: 255-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfRateLimitAclIndex Index of acl rule. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.1 |
| hpnicfRateLimitLinkAclRule The number of link acl-rule. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.10 |
| hpnicfRateLimitTargetRateMbps Target rate: Mbps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.11 |
| hpnicfRateLimitTargetRateKbps Target rate: Kbps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.12 |
| hpnicfRateLimitPeakRate Peak rate of the rate-limited port. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.13 |
| hpnicfRateLimitCIR CIR of the rate-limited port. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.14 |
| hpnicfRateLimitCBS Burst traffic of the rate-limited port. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.15 |
| hpnicfRateLimitEBS Excess burst traffic of the rate-limited port. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.16 |
| hpnicfRateLimitPIR PIR of the rate-limited port. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.17 |
| hpnicfRateLimitConformLocalPre Conform local pre. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.18 |
| hpnicfRateLimitConformActionType Conform action type. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.19 |
| hpnicfRateLimitIfIndex ifIndex of the rate-limited port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.2 |
| hpnicfRateLimitExceedActionType Exceed action type. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.20 |
| hpnicfRateLimitExceedDscp Exceed DSCP.
<0-63> Value of DSCP
af11 Specify Assured Forwarding 11 service(10)
af12 Specify Assured Forwarding 12 service(12)
af13 Specify Assured Forwarding 13 servic… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.21 |
| hpnicfRateLimitRuntime Runtime. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.22 |
| hpnicfRateLimitRowStatus RowStatus, now support three status: createAndGo, active, destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.23 |
| hpnicfRateLimitExceedCos Exceeding COS of rate-limited port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.24 |
| hpnicfRateLimitConformDscp If the user choose remark-dscp value of the hpnicfRateLimitConformActionType,
This object can be used to set the conform dscp value. There are a few
enumerations as follows:
<0-6… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.26 |
| hpnicfRateLimitMeterStatByteCount The counter of conform byte. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.27 |
| hpnicfRateLimitMeterStatByteXCount The counter of exceed byte. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.28 |
| hpnicfRateLimitMeterStatState The status of meter statistic. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.29 |
| hpnicfRateLimitVlanID Vlan ID. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.3 |
| hpnicfRateLimitDirection Direction of the rate-limited port. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.4 |
| hpnicfRateLimitUserAclNum The number of user acl. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.5 |
| hpnicfRateLimitUserAclRule The number of user acl-rule. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.6 |
| hpnicfRateLimitIpAclNum The number of Ip acl. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.7 |
| hpnicfRateLimitIpAclRule The number of Ip acl-rule. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.8 |
| hpnicfRateLimitLinkAclNum The number of link acl. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.9 |