snChasFlashCard

HP-SN-AGENT-MIB · .1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.22
MIB view Table view

Object

scalar Integer32 
A bit array that contains the value of the
flash card status. This is a packed bit string. The
status of each flash card is encoded into one bit.
          
  bit value    meaning
  ---------    -------
      0         flash card absent.
      1         flash card present.
          
There are up to two flash cards in this release.
This object is valid if M4 management module is present.
The following shows the meaning of each bit:
(bit 0 is the least significant bit).
          
  bit position   meaning
  ------------   -------
2-31       reserved
1          flash card 2 status
      0          flash card 1 status

Context

MIB
HP-SN-AGENT-MIB
OID
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.22
Type
scalar
Access
readonly
Status
current
Parent
snChasGen
Siblings
25

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snChasType
The chassis type represents the type of Foundry product being managed.
scalarOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.1
snChasTrafficLeds
A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of port…
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.10
snChasMediaLeds
A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports…
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.11
snChasEnablePwrSupplyTrap
Indicates whether the SNMP agent process is permitted to generate power supply failure traps.
scalarEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.12
snChasMainBrdId
The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which iden…
scalarOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.13
snChasExpBrdId
The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0 - octet string…
scalarOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.14
snChasSpeedLeds
A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximum number of ports…
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.15
snChasEnableFanTrap
Indicates whether the SNMP agent process is permitted to generate fan failure traps.
scalarEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.16
snChasIdNumber
An administratively-assigned chassis identity number, used by inventory control.
scalarOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.17
snChasActualTemperature
Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applicable management modu…
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.18
snChasWarningTemperature
Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only management module built with…
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.19
snChasSerNum
The serial number of the chassis. If the serial number is unknown or unavailable then the value should be a zero length string.
scalarOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.2
snChasShutdownTemperature
Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. Only management modul…
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.20
snChasEnableTempWarnTrap
Indicates whether the SNMP agent process is permitted to generate temperature warning traps.
scalarEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.21
snChasFlashCardLeds
A bit array that contains the value of the flash card LEDs. This is a packed bit string; each LED is encoded into 1 bit for each flash card. bit value meaning ---…
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.23
snChasNumSlots
Number of slots of the chassis.
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.24
snChasArchitectureType
Architecture type.
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.25
snChasProductType
Product type.
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.26
snChasPwrSupplyStatus
A bit array that contains the value of the Chassis Power Supplies. This is a packed bit string; the 2 power supplies status are encoded into 4 bits (a nibble). There a…
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.3
snChasFanStatus
A bit array that contains the value of the fan status. This is a packed bit string. The status of each fan is encoded into one bit. bit value meaning --------- …
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.4
snChasMainBrdDescription
The main board description string. (It is obsoleted for Chassis Product)
scalarOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.5
snChasMainPortTotal
The total number of ports for the main board. (It is obsoleted for Chassis Product)
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.6
snChasExpBrdDescription
The expansion board description string. Expansion board are those boards attaching on the main board. (It is obsoleted for Chassis Product)
scalarOctetString.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.7
snChasExpPortTotal
The total number of ports for the expansion board. (It is obsoleted for Chassis Product)
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.8
snChasStatusLeds
A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number of ports in one ch…
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.9