scanner-scanline-statistics – HP-LASERJET-COMMON-MIB

Object

scalar mandatory SNMPv2-TCDisplayString

This object is used to obtain statistics about the scan line
that was previously obtained using the SCANNER-RETRIEVE-SCANLINE
object. Just as SERVICE-PASSWORD must be set correctly for
SCANNER-RETRIEVE-SCANLINE, it must be set correctly to use this
object as well.
Additional information:
This object is used to obtain statistics about
the scan line that was previously grabbed using the SCANNER_
RETRIEVE_SCANLINE object, max string is 256 bytes.  The format
is the following: max red value; position; min red value; position;
max red pixel to pixel difference; position; red mean; max blue value; 
position; min blue value; position; max blue pixel to pixel difference;
position; blue mean; max green value; position; min green value; 
position; max green pixel to pixel difference; position; green mean;

Context

MIB: HP-LASERJET-COMMON-MIB
OID: .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.51
Type: scalar
Access: readonly
Status: mandatory
Parent: settings-scanner

Net-SNMP examples

How SNMP and these commands work

Scalars have one instance, identified by the .0 suffix.

Read the scalar instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'HP-LASERJET-COMMON-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-LASERJET-COMMON-MIB::scanner-scanline-statistics.0'

More examples

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'HP-LASERJET-COMMON-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HP-LASERJET-COMMON-MIB::scanner-scanline-statistics'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints

range: 0..255