prtoutputpagedeliveryorientation
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.20
Object
scalar
mandatory
Enumeration
The reading surface that will be `up' when pages are delivered to the associated output sub-unit. Values are faceUp and faceDown. (Note: interpretation of these values is in general context-dependent based on locale; presentation of these values to an end-user should be normalized to the expectations of the user). Refer to Standard Printer MIB for more details.
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.20- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- prtOutputEntry
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtoutputversion mandatory The version of this output sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
Returns device-specific information about the configurat… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.10 |
| prtoutputserialnumber mandatory The serial number assigned to this output sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
LaserJet 4000 Series does not support a s… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.11 |
| prtoutputdescription mandatory A free-form text description of this output sub-unit in the
localization specified by prtGeneralCurrentLocalization.
Refer to Standard Printer MIB for more details. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.12 |
| prtoutputsecurity mandatory Indicates if this output sub-unit has some security associated
with it and if that security is enabled or not.
Refer to Standard Printer MIB for more details.
Additional … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.13 |
| prtoutputdimunit mandatory The unit of measurement for use in calculating and relaying
dimensional values for this output sub-unit.
Refer to Standard Printer MIB for more details.
Additional inform… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.14 |
| prtoutputmaxdimfeeddir mandatory The maximum dimensions supported by this output sub-unit
for measurements taken parallel relative to the feed
direction associated with that sub-unit in output
sub-unit dimensiona… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.15 |
| prtoutputmaxdimxfeeddir mandatory The maximum dimensions supported by this output sub-unit
for measurements taken ninety degrees relative to the
feed direction associated with that sub-unit in output
sub-unit dime… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.16 |
| prtoutputmindimfeeddir mandatory The minimum dimensions supported by this output sub-unit
for measurements taken parallel relative to the feed
direction associated with that sub-unit in output
sub-unit dimensiona… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.17 |
| prtoutputmindimxfeeddir mandatory The minimum dimensions supported by this output sub-unit
for measurements taken ninety degrees relative to the
feed direction associated with that sub-unit in output
sub-unit dime… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18 |
| prtoutputstackingorder mandatory The current state of the stacking order for the
associated output sub-unit. `FirstToLast' means
that as pages are output the front of the next page is
placed against the back of t… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.19 |
| prtoutputtype mandatory The type of technology supported by this output sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
LaserJet 4000 Series has two built-… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.2 |
| prtoutputbursting mandatory This object indicates that the outputting sub-unit
supports bursting, and if so, whether the feature is enabled.
Bursting is the process by which continuous media is separated
int… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.21 |
| prtoutputdecollating mandatory This object indicates that the output supports
supports decollating, and if so, whether the feature
is enabled. Decollating is the process by which the
individual parts within a m… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.22 |
| prtoutputpagecollated mandatory This object indicates that the output sub-unit
supports page collation, and if so, whether the feature is
enabled. See glossary for definition of how this document defines
collati… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.23 |
| prtoutputoffsetstacking mandatory This object indicates that the output supports
supports offset stacking, and if so, whether the feature is
enabled. See glossary for how Offset Stacking is defined by this
documen… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.24 |
| prtoutputcapacityunit mandatory The unit of measurement for use in calculating and relaying
capacity values for this output sub-unit.
Refer to Standard Printer MIB for more details.
Additional informati… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.3 |
| prtoutputmaxcapacity mandatory The maximum capacity of this output sub-unit in output
sub-unit capacity units (PrtCapacityUnitTC). There is no
convention associated with the media itself so this value
essential… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4 |
| prtoutputremainingcapacity mandatory The remaining capacity of the possible output sub-unit
capacity in output sub-unit capacity units (PrtCapacityUnitTC)
of this output sub-unit. If this output sub-unit can
reliably… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.5 |
| prtoutputstatus mandatory The current status of this output sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
Replaces PML NOT-READY-OUTBIN-MISSING and
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.6 |
| prtoutputname mandatory The name assigned to this output sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
Replaces PML OUTBINn-NAME.
The c… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.7 |
| prtoutputvendorname mandatory The vendor name of this output sub-unit.
Refer to Standard Printer MIB for more details. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.8 |
| prtoutputmodel mandatory The name assigned to this output sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
LaserJet 4000 Series does not support a model numb… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.9 |