prtmarkerstatus
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.15
Object
scalar
mandatory
Integer32
The current status of this marker sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
Replaces PML NOT-READY-DESTINATION-PRINT-ENGINE and
STATUS-DESTINATION-PRINT-ENGINE.
51 = No toner cart.
49 = Low toner and toner low = stop in config menu
14 = Low toner and toner low = continue in config menu
and paper is moving.
08 = Low toner and toner low = continue in config menu
and no paper is moving.
00 = OK.
The default value assumes no malfunctions.
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.15- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- prtMarkerEntry
- Siblings
- 13
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtmarkeraddressabilityxfeeddir mandatory The maximum number of addressable marking positions in the cross
feed direction in 10000 units of measure specified by
prtMarkerAddressabilityUnit. A value of (-1) implies 'other… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.10 |
| prtmarkernorthmargin mandatory The margin, in units identified by prtMarkerAddressabilityUnit,
from the leading edge of the medium as the medium flows
through the marking engine with the side to be imaged
facin… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.11 |
| prtmarkersouthmargin mandatory The margin from the South edge (see prtMarkerNorthMargin)
of the medium in units identified by
prtMarkerAddressabilityUnit. Printing within the area bounded by
all four margins … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.12 |
| prtmarkerwestmargin mandatory The margin from the West edge (see prtMarkerNorthMargin) of the
medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins is
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.13 |
| prtmarkereastmargin mandatory The margin from the East edge (see prtMarkerNorthMargin) of the
medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins is
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.14 |
| prtmarkermarktech mandatory The type of marking technology used for this marking sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
ePelectrophotographicLaser is … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.2 |
| prtmarkercounterunit mandatory The unit that will be used by the printer when reporting
counter values for this marking sub-unit. The
time units of measure are provided for a device like a
strip recorder that … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.3 |
| prtmarkerlifecount mandatory The count of the number of units of measure counted during
the life of printer using units of measure as specified by
prtMarkerCounterUnit.
Refer to Standard Printer MIB for more… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.4 |
| prtmarkerpoweroncount mandatory The count of the number of units of measure counted since the
equipment was most recently powered on using units of measure as
specified by prtMarkerCounterUnit.
Refer to Standar… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.5 |
| prtmarkerprocesscolorants mandatory The number of process colors supported by this marker. A
process color of 1 implies monochrome. The value of this
object and prtMarkerSpotColorants cannot both be 0. The value … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.6 |
| prtmarkerspotcolorants mandatory The number of spot colors supported by this marker. The
value of this object and prtMarkerProcessColorants cannot
both be 0. Must be 0 or greater.
Refer to Standard Printer MIB… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.7 |
| prtmarkeraddressabilityunit mandatory The unit of measure of distances, as applied to the marker's
resolution.
Refer to Standard Printer MIB for more details.
Additional information:
This will always be… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.8 |
| prtmarkeraddressabilityfeeddir mandatory The maximum number of addressable marking positions in the feed
direction per 10000 units of measure specified by
prtMarkerAddressabilityUnit. A value of (-1) implies 'other' or
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.9 |