prtmarkerlifecount
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.4
Object
scalar
mandatory
Integer32
The count of the number of units of measure counted during
the life of printer using units of measure as specified by
prtMarkerCounterUnit.
Refer to Standard Printer MIB for more details.
Additional information:
Replaces PML TOTAL-ENGINE-PAGE-COUNT.
The total engine page count is kept in NVRAM however
the NVRAM value is only updated every 10 impressions.
NOTE: The value returned by this OID will be incremented
every page but if power is lost between NVRAM updates,
up to 9 impressions of the page count may be lost. The
counter will be reset to zero after 999999 pages.
The page count is incremented when a sheet of media is
pulled from an input tray. A duplex printed sheet will
cause this counter to be incremented by two.
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.4- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- prtMarkerEntry
- Siblings
- 13
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Object Constraints
range: 0-255
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtmarkeraddressabilityxfeeddir mandatory The maximum number of addressable marking positions in the cross
feed direction in 10000 units of measure specified by
prtMarkerAddressabilityUnit. A value of (-1) implies 'other… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.10 |
| prtmarkernorthmargin mandatory The margin, in units identified by prtMarkerAddressabilityUnit,
from the leading edge of the medium as the medium flows
through the marking engine with the side to be imaged
facin… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.11 |
| prtmarkersouthmargin mandatory The margin from the South edge (see prtMarkerNorthMargin)
of the medium in units identified by
prtMarkerAddressabilityUnit. Printing within the area bounded by
all four margins … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.12 |
| prtmarkerwestmargin mandatory The margin from the West edge (see prtMarkerNorthMargin) of the
medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins is
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.13 |
| prtmarkereastmargin mandatory The margin from the East edge (see prtMarkerNorthMargin) of the
medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins is
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.14 |
| prtmarkerstatus mandatory The current status of this marker sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
Replaces PML NOT-READY-DESTINATION-PRINT-ENGINE a… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.15 |
| prtmarkermarktech mandatory The type of marking technology used for this marking sub-unit.
Refer to Standard Printer MIB for more details.
Additional information:
ePelectrophotographicLaser is … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.2 |
| prtmarkercounterunit mandatory The unit that will be used by the printer when reporting
counter values for this marking sub-unit. The
time units of measure are provided for a device like a
strip recorder that … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.3 |
| prtmarkerpoweroncount mandatory The count of the number of units of measure counted since the
equipment was most recently powered on using units of measure as
specified by prtMarkerCounterUnit.
Refer to Standar… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.5 |
| prtmarkerprocesscolorants mandatory The number of process colors supported by this marker. A
process color of 1 implies monochrome. The value of this
object and prtMarkerSpotColorants cannot both be 0. The value … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.6 |
| prtmarkerspotcolorants mandatory The number of spot colors supported by this marker. The
value of this object and prtMarkerProcessColorants cannot
both be 0. Must be 0 or greater.
Refer to Standard Printer MIB… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.7 |
| prtmarkeraddressabilityunit mandatory The unit of measure of distances, as applied to the marker's
resolution.
Refer to Standard Printer MIB for more details.
Additional information:
This will always be… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.8 |
| prtmarkeraddressabilityfeeddir mandatory The maximum number of addressable marking positions in the feed
direction per 10000 units of measure specified by
prtMarkerAddressabilityUnit. A value of (-1) implies 'other' or
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.9 |