prtinputmediadimxfeeddirdeclared

This object provides the value of the declared dimension, in
the cross feed direction, of the media that is (or, if empty,
was or will be) in this input sub-unit.  The cross  feed
direction is ninety degrees relative to the feed direction
associated with this sub-unit. This dimension is measured in
input sub-unit dimensional units (prtInputDimUnit).  If this
input sub-unit can reliably sense this value, the value is
sensed by the printer and may not be changed by management
requests. Otherwise, the value may be changed. The value (-1)
means other and specifically means that this sub-unit places
no restriction on this parameter. The value (-2) indicates
unknown.
	Refer to Standard Printer MIB for more details.
        Additional information:
        For trays 2, 3, and 5 (which can reliably sense this
        value) these objects behave exactly the same as prtInputMediaDimXFeedDirChosen.
        Attempting to set these objects for tray 2, 3, and 5 will cause
        <noSuchName> to be returned.  
        The default values assume the trays are configured for letter size paper (or COM10,
        in the case of the envelope feeder). For tray 1 the value is the dimension for the
        media size currently declared.  
        Valid values are 0 to 268435455. If a value within 0.2 inches of a standard
        size (e.g. 85001) is chosen when setting these objects, the standard size will
        be set for the specified tray if the value of prtInputMediaDimFeedDirDeclared
        is also set to within 0.2 inches of the same standard size. If the value is not
        within 0.2 inches, Custom will be chosen as the size if it is supported by the
        specified tray, otherwise the first available standard size for the tray will
        be selected.

MIB

HP-LASERJET-COMMON-MIB

OID

.1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5

Type

scalar

Access

readwrite

Status

mandatory

Parent

prtInputEntry