prtinputdefaultindex
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6
Object
scalar
mandatory
Integer32
The value of prtInputIndex corresponding to the default input
sub-unit: that is, this object selects the default source of
input media.
This value shall be -1 if there is no default input subunit specified
for the printer as a whole. In this case, the actual default
input subunit may be specified by means outside the scope of this
MIB, such as by each interpreter in a printer with multiple
interpreters.
Refer to Standard Printer MIB for more details.
Additional information:
The default input tray is determined by the printer
based on DEFAULT-MEDIA-SIZE and DEFAULT-MEDIA-NAME, and whether or
not optional trays are installed.
If Tray 1 is set in FIRST mode then the size of paper loaded in
Tray 1 is assumed to be the requested size. In this case, the printer will
pick from Tray 1 without regard to the requested size unless the
print job's paper size, paper type and tray designations exactly
match the configuration of another tray; in that case, the requested
tray will be picked.
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- prtGeneralEntry
- Siblings
- 18
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Object Constraints
range: 0-255
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtgeneralconfigchanges mandatory Counts configuration changes that change the capabilities of
a printer, such as the addition/deletion of input/output bins,
the addition/deletion of interpreters, or changes in me… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.1 |
| prtconsolelocalization mandatory The value of the prtLocalizationIndex corresponding to
the language, country, and character set to be used for the
console. This localization applies both to the actual display
o… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.10 |
| prtconsolenumberofdisplaylines mandatory The number of lines on the printer's physical
display. This value is 0 if there are no lines on the
physical display or if there is no physical display
Refer to Standard Printer… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.11 |
| prtconsolenumberofdisplaychars mandatory The number of characters per line displayed on the physical
display. This value is 0 if there are no lines on the
physical display or if there is no physical display
Refer to St… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.12 |
| prtconsoledisable mandatory If the object prtConsoleDisable has value
'operatorConsoleDisabled' then input is not accepted from the
operator console. If the object prtConsoleDisable has the value
'operatorCo… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.13 |
| prtgeneralstartuppage mandatory Used to enable or disable printing a startup page. If
enabled, a startup page will be printed shortly after
power-up, when the device is ready. Typical startup
pages include test … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.14 |
| prtgeneralbannerpage mandatory Used to enable or disable printing banner pages at the
beginning of jobs. This is a master switch which applies
to all jobs, regardless of interpreter.
Refer to Standard Printer M… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.15 |
| prtgeneralprintername mandatory An administrator-specified name for this printer.
Depending upon implementation of this printer, the value of this
object may or may not be same as the value for the MIB-II
'SysNa… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.16 |
| prtgeneralserialnumber mandatory A recorded serial number for this device that indexes some type
device catalog or inventory. This value is usually set by the
device manufacturer but the MIB supports the option … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.17 |
| prtalertcriticalevents mandatory A running counter of the number of critical alert events
that have been recorded in the alert table. The value of this
object is RESET in the event of a power cycle operation (i.e… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.18 |
| prtalertallevents mandatory A running counter of the total number of alert event entries
(critical and non-critical) that have been recorded in the
alert table
Refer to Standard Printer MIB for more details.… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.19 |
| prtgeneralcurrentlocalization mandatory The value of the prtLocalizationIndex corresponding to the
current language, country, and character set to be used for
localized string values that are identified as being depende… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.2 |
| prtgeneralreset mandatory Setting this value to `powerCycleReset', `resetToNVRAM', or
`resetToFactoryDefaults' will result in the resetting of the
printer. When read, this object will always have the valu… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.3 |
| prtgeneralcurrentoperator mandatory The name of the person who is responsible for operating
this printer. It is suggested that this string include
information that would enable other humans to reach the operator,
su… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.4 |
| prtgeneralserviceperson mandatory The name of the person responsible for servicing this
printer. It is suggested that this string include information
that would enable other humans to reach the service person, suc… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5 |
| prtoutputdefaultindex mandatory The value of prtOutputIndex corresponding to the default
output sub-unit; that is, this object selects the default
output destination.
This value shall be -1 if there is no def… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.7 |
| prtmarkerdefaultindex mandatory The value of prtMarkerIndex corresponding to the
default marker sub-unit; that is, this object selects the
default marker.
Refer to Standard Printer MIB for more details.
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.8 |
| prtmediapathdefaultindex mandatory The value of prtMediaPathIndex corresponding to
the default media path; that is, the selection of the
default media path.
Refer to Standard Printer MIB for more details.
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.9 |