photo-clear-counts
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.18
Object
scalar
mandatory
r/w
Enumeration
writing this object causes the page counts, insert counts, or all photo counts to be cleared and reset to 0. Additional information: writing this object causes the page counts, insert counts, or all photo counts to be cleared and reset to 0.
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.18- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- settings-photo-job
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| photo-default-num-copies mandatory Reads or writes the default number of copies to be printed
during photo application print jobs. This value is saved over a
power cycle.
Additional information:
Reads or writes the… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.1 |
| photo-images-on-card mandatory Reads the number of printable photo images found on the
inserted memory card. If 0, then no images were found, or the
card was not properly inserted.
Additional information:
Reads… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.10 |
| photo-job-source mandatory Controls initiating photo application features.
Additional information:
Controls initiating photo application features. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.11 |
| photo-color-page-count mandatory Reads or writes the page count for color pages printed by the
photo application. This value is saved over power cycles.
Additional information:
Reads or writes the page count for … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.12 |
| photo-mono-page-count mandatory Reads or writes the page count for monochrome pages printed by
the photo application. This value is saved over power cycles.
Additional information:
Reads or writes the page count… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.13 |
| photo-image-size-set mandatory This is only writable in service mode. This object changes the
set of valid image sizes for the device. The image sizes groups
are as follows:
eImageSizeSetInch1: Wallet, … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.15 |
| photo-compact-flash-insert-count mandatory Reads or writes the count for the number of times a compact
flash memory card has been inserted in the device. This value
is saved over a power cycle.
Additional information:
read… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.19 |
| photo-job-num-copies mandatory Reads or writes the number of copies to be printed during the
next photo application print job. This value is not saved over
power cycles.
Additional information:
Reads or writes … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.2 |
| photo-memory-stick-insert-count mandatory Reads or writes the count for the number of times a memory
stick memory card has been inserted in the device. This value
is saved over a power cycle.
Additional information:
reads… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.20 |
| photo-memory-stick-pro-insert-count mandatory Reads or writes the count for the number of times a memory
stick pro memory card has been inserted in the device. This
value is saved over a power cycle.
Additional information:
r… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.21 |
| photo-smart-media-insert-count mandatory Reads or writes the count for the number of times a smart media
memory card has been inserted in the device. This value is
saved over a power cycle.
Additional information:
reads … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.22 |
| photo-secure-digital-insert-count mandatory Reads or writes the count for the number of times a secure
digital memory card has been inserted in the device. This value
is saved over a power cycle.
Additional information:
rea… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.23 |
| photo-mmc-insert-count mandatory Reads or writes the count for the number of times a
MultiMediaCard memory card has been inserted in the device.
This value is saved over a power cycle.
Additional information:
rea… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.24 |
| photo-xd-insert-count mandatory Reads or writes the count for the number of times an xD-Picture
memory card has been inserted in the device. This value is
saved over a power cycle.
Additional information:
reads … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.25 |
| photo-job-media-size mandatory Reads or writes the default media size to be used during the
next photo application print job. This value is not saved over
power cycles.
Additional information:
Reads or writes t… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.4 |
| photo-job-media-name mandatory Reads or writes the media type to be used on the next photo
application print job. This value is not saved over power
cycles.
Additional information:
Reads or writes the media typ… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.6 |
| photo-image-size mandatory Reads or writes the default image size to be used during photo
application print jobs. This value is saved over power cycles.
Additional information:
Reads or writes the default i… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.7 |
| photo-job-image-size mandatory Reads or writes the image size to be used during the next photo
application print job. This value is not saved over power
cycles.
Additional information:
Reads or writes the image… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.8 |
| photo-select-images mandatory Reads or writes the list of images to print during the next
photo application print job. Each image number or number range
must be separated by a comma. The image number correspon… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.9 |