pcl-default-font-height

HP-LASERJET-COMMON-MIB · .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13
MIB view Table view

Object

scalar mandatory r/w Integer32 
Returns or changes the default PCL height.  Height is an
approximate measure of the body of the type in
centipoints.  A centipoint is 1/7200 inch.  Height
applies only to proportional fonts.  Point size, in
points, can be converted to font height, in centipoints,
by multiplying the point size by 100.  The POS indicates
the supported values.  An unsupported value causes the
printer to use the closest supported value, causing the
printer to return <noError>.
''Closest'' means the smallest absolute difference.
Additional information:
Supported values range from 400 to 99975, in
increments of 25 units.
Setting to an unsupported value causes the 
printer to substitute in a snap value and to 
return <noError> status.   
The snap values are as follow:   
<=400 snaps to 400   
>=99975 snaps to 99975   
Unsupported values in the range 400 to 99975 snap
DOWN to the previous supported value 
(i.e 25293 snaps to 25275 or 75038 snaps to 75025).

Context

MIB
HP-LASERJET-COMMON-MIB
OID
.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13
Type
scalar
Access
readwrite
Status
mandatory
Parent
pdl-pcl
Siblings
9

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pcl-datecode mandatory
This indicates the PCL firmware date code in yyyymmdd format.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.1
pcl-default-symbol-set mandatory
Returns or changes the default PCL symbol set. The enumeration values match the values supported by the PCL Symbol Set Code escape sequence, <ESC>*c#R. The binary representation…
scalarEnumeration.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.11
pcl-default-font-source mandatory
Returns or changes the value of the default font source variable in NVRAM.
scalarEnumeration.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14
pcl-default-font-number mandatory
Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an <badValue>. Additional information: Vali…
scalarInteger32.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15
pcl-default-font-width mandatory
Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only to fixed space fon…
scalarInteger32.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16
pcl-resource-saving-memory-size mandatory
Returns or changes the amount of resource saving memory set aside to hold permanent soft PCL resources. Additional information: The value returned by this object is the amount of …
scalarInteger32.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2
pcl-name mandatory
Contains the name of the PDL. For PCL, the name is `PCL'.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.3
pcl-version mandatory
Contains the PDL version.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.4
pcl-total-page-count mandatory
Total number of PCL pages printed by the device. Additional information: In LaserJet 4050 Series the PCL page count is kept in NVRAM, and the NVRAM value is updated at least every…
scalarInteger32.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5