outbin9-error-info

HP-LASERJET-COMMON-MIB · .1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.12
MIB view Table view

Object

scalar mandatory OctetString 
A device specific description of the last error
encountered for output bin 9.  Each POS should document
the meaning of all supported error information.
Additional information:
This is a description of the current error state of a 
finishing device. (ie stapler).  If the bin does not
support any finishing capabilities then the object
will return <badValue>.
The possible return values are as follows:
Byte1, Byte2, and Byte3 should be 0x00. as they are
reserved for future use. 
Byte4 is a bit field that can be interpreted as 
follows:  
bit 0 -- unused  
bit 1 -- eBinderOut   Out of staples  
bit 2 -- eBinderLimit Too many pages to finish  
bit 3 -- eBinderJam   Staple jammed in stapler  
bit 4 -- eBinderAlign Pages aren't aligned correctly  
to finish.  
bit 5 -- unused  
bit 6 -- unused  
bit 7 -- unused  
          
	OUTBIN3 is the topmost bin on the output device.  This bin
 replaces the left output bin on the base printer.  OUTBIN4
through OUTBIN8 are the additional 5 regular bins supplied 
	by the MBM5S device.  OUTBIN9 is the stapler unit and is
 the lowest bin in the device.
NOTE: Because HP is marketing a device with a max of
7 bins (MBM5S) the OUTBINn-ERROR-INFO objects are
	3-9 but the external device specification requires
	support of up to 315 output bins.  Therefore if these 
	bins exist above 7, then the coresponding objects will
	also exist OUTBIN10-ERROR-INFO through OUTBIN317-ERROR-INFO.

Context

MIB
HP-LASERJET-COMMON-MIB
OID
.1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.12
Type
scalar
Access
readonly
Status
mandatory
Parent
outbin9
Siblings
3

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
outbin9-maximum-binding mandatory
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding…
scalarInteger32.1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.10
outbin9-phd mandatory
Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.
scalarInteger32.1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.11
outbin9-override-mode mandatory
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends…
scalarOctetString.1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.9