not-ready-source-scanner
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.1
Object
scalar
mandatory
OctetString
Indicates whether and why the scanner is not ready. A set bit indicates a problem. Additional information: ISSUES: HP LaserJet 1100 only used cScannerFeederJam. Tahiti does not have an ADF sensor. Can cScannerFeederEmpty still be used (i.e. when the device tries to pull a page, but the ADF is empty or a mispick occurred). cInvalidScannerMediaSize may be used. If a page is longer that 33 inches normally this would be shown to the host as a Jam. However, can the device use cInvalidScannerMediaSize instead?
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.1- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- status-scanner
- Siblings
- 9
Syntax
OctetString
Values & Constraints
Enumerated Values
1 | eOff |
2 | eOn |
3 | eAuto |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| scanner-reference-position mandatory Provides 3 pairs of x,y coordinates within a specified range of
the calibrate reference position. The device specific POS
should specify the valid ranges. The format is the follow… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.10 |
| scanner-sensor-manufacturer mandatory Reports the scan sensor manufacturer. The device specific POS
should list valid manufacturers.
Additional information:
Reports the scan sensor manufacturer. The device specific
P… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.11 |
| copy-scanner-dimensions mandatory This object is used to obtain the exact pixel scan dimensions
for copy. The dimensions returned correspond to the quality,
reduce/enlarge, and media size currently selected.
Addit… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.13 |
| scan-resolution-range mandatory Enumerates the range of selectable scanning resolutions.
Format as follows: Each supported resolution is in the
format: (m)x(n) where m describes the x dpi resolution
along the pa… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.3 |
| scan-calibration-download mandatory Returns or changes the state of the calibration
operation.
cScanCalibrationIdle - indicates that calibration is not
in progress.
cScanCalibrationStart - This state is set by h… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.5 |
| scan-calibration-error mandatory Error status of the most recent calibration session.
eNoError(1) - The calibation was successful.
eUnknownCalibrationError(2) - An unknown error
occurred.
eScannerFeederEmpt… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6 |
| scanner-button-status mandatory Indicates the scanner button has been pressed. The value
changes to eOn(2) when the button is pressed. The host
acknowledges the button press by setting the value to
eOff(1). | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.7 |
| scanner-lamp-gain-value mandatory Provides PWM and analog gain for the color channels. The range
will vary based on scan mode. The device specific POS should
describe the valid range. The format is the following: … | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.8 |
| scanner-light-monitor-window mandatory Provides the pixel at which the LMW starts, as the ratio of the
average LMW value to the six pixel average value. The device
specific pos should specify the valid ranges for each … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.9 |