not-ready-controller

Indicates if the hardware controller sub-system in the
device is not ready.  If there are no items in the
collection (i.e. no bits are set), then the hardware
controller sub-system is ready.  If there is an item
present, then the item indicates what is causing the
hardware controller sub-system to be not ready.  If the
cControllerFailure item is in the collection, then a
hardware error was detected on the main controller PC
board, sometimes called the formatter or the logic
broad.  Example controller hardware errors include DRAM
controller failure, clock failure, memory parity error,
and ROM CRC error.  The cFirmwareFailure item is in the
collection if a firmware/software error was detected.
Device specific detailed error information can be
retrieved from the error log objects, if the device
supports those objects.  The POS will list which device
failures cause each item to be included in the
collection.
Additional information:
A controller failure occurrence will set the 
	cControllerFailure bit (bit 1). The controller 
	failures are: 62.X Service, 63 Service, 65 Service,
	67 Service, 68 Service, and 68 Error.  
	A SIMM failure occurrence will set the cSIMMFailure
	bit (bit 2).  The SIMM failures are 61.X Service,
	53-XY-ZZ Error, and 72 Service.  
	A DISK failure occurrence will set the cATFailure 
	bit (bit 3).  The DISK failure is FS DISK FAILURE.

MIB

HP-LASERJET-COMMON-MIB

OID

.1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.3

Type

scalar

Access

readonly

Status

mandatory

Parent

status-system

Siblings

30