jetsend-contact-password

A C structure containing the following fields:
typedef struct {
    ubyte old_password[8];
    ubyte new_password[8];/
} jetsend_change_contact_password_t;
where ubyte is an unsigned byte (0-255).
Additional information:
Controls access to the JetSend processing subsystem.
Password absence/presence determines whether the device will allow
a session to be established. The following C data structure
contains the relevant fields (described in subsequent paragraphs):
          
typedef struct {
unsigned char old_password[8];
unsigned char new_password[8];
}
          
Whenever the password is disabled (i.e., is zero-filled for its
entire length), the device is indicating its willingness to allow
session establishment. Whenever the password is enabled (i.e., has
one or more non-zero-filled values), the device is controlling
session establishment -- all in-progress JetSend sessions must
supply a matching password or the device will reject the in-progress
session.
          
To disable the password, specify the matching password via the
'old_password' field and zero-fill the 'new_password' field.
To enable the password for the first time, zero-fill the
'old_password' field and specify the new password via the
'new_password' field (the new password should not be
zero-filled; otherwise, the password will remain disabled).
To enable or change the password thereafter, specify the
matching password via the 'old_password' field and specify
the new password via the 'new_password' field (the new
desired password should not be zero-filled; otherwise,
the password will be disabled). To determine if the password
is enabled, zero-fill both the 'old_password' and 'new_password'
fields. If an error occurs, the password is enabled; otherwise,
the password is disabled.
          
(Specifying either an 'old_password' or 'new_password'
fields greater than eight (8) bytes causes the error
<badValue> to be returned.)
          
   This object will be enabled in IR devices even if is does not
   detect an EIO card.

MIB

HP-LASERJET-COMMON-MIB

OID

.1.3.6.1.4.1.11.2.3.9.4.2.1.3.8.3.1.1

Type

scalar

Access

readwrite

Status

mandatory

Parent

settings-jetsend-contact

Siblings

1