hrdevicestatus

HP-LASERJET-COMMON-MIB · .1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.5
MIB view Table view

Object

scalar mandatory Enumeration 
The current operational state of the device
described by this row of the table.  A value
unknown(1) indicates that the current state of the
device is unknown.  running(2) indicates that the
device is up and running and that no unusual error
conditions are known.  The warning(3) state
indicates that agent has been informed of an
unusual error condition by the operational software
(e.g., a disk device driver) but that the device is
still 'operational'.  An example would be high
number of soft errors on a disk.  A value of
testing(4), indicates that the device is not
available for use because it is in the testing
state.  The state of down(5) is used only when the
agent has been informed that the device is not
available for any use.
Refer to RFC 1514, Host Resources MIB, for more details.
  Additional information (printer) :
  The printer's condition is mapped as follows (printer):  
            
  eHrunning -- Printer ready to print or is printing.  May be in power save
  mode.  
            
  eHwarning -- A condition exists that needs attention but it is
  not currently preventing printing. A non-critical alert is active.  
            
  eHdown -- Printer is not printing because it is offline or a critical
  alert is active.  Human interaction is needed to bring the printer to
  a ready state.
  Additional information (mass storage) :
  Returns mass storage device status information.
  running -- mass storage device functional.  May be in power save
  mode.
  warning -- The mass storage device failed a self-test but completed
  the power-on initialization sequence.  The mass storage device
  is readable even when the mass storage device fails the power-up
  self-test in order to give the customer a chance to
  retrieve any data that can be made available.
  testing -- Mass storage device is executing a test.
  down -- Mass storage device is non-functional. Returns
  <noSuchName> status if attempting
  to perform a Get on this OID with no mass storage device
  installed.

Context

MIB
HP-LASERJET-COMMON-MIB
OID
.1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.5
Type
scalar
Access
readonly
Status
mandatory
Parent
hrDeviceEntry
Siblings
5

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hrdeviceindex mandatory
A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the next re-initializatio…
scalarInteger32.1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.1
hrdevicetype mandatory
An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to this device. If thi…
scalarObjectIdentifier.1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.2
hrdevicedescr mandatory
A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. Refer to RFC 1514, Host Resources MIB, for more details.…
scalarOctetString.1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.3
hrdeviceid mandatory
The product ID for this device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information (printer) : The complete OID reported by this object is: .1.3…
scalarObjectIdentifier.1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.4
hrdeviceerrors mandatory
The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recom…
scalarInteger32.1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.6