gdStatusLaaSupport

HP-LASERJET-COMMON-MIB · .1.3.6.1.4.1.11.2.3.9.1.1.12
MIB view Table view

Object

scalar mandatory r/w Integer32 
This value represents what protocols Locally Administered
addressing is supported over.  This is currently 0 for
802.3 cards and 7 for 802.5 cards.  LAA is not supported
on 802.3.  The value is a mask of bits, 1 for each of the
protocols below. 
+-----------------------------------------------+
| NA  | NA  | NA  | NA  | NA  | TCP | LLC | NOV |
+-----------------------------------------------+

Context

MIB
HP-LASERJET-COMMON-MIB
OID
.1.3.6.1.4.1.11.2.3.9.1.1.12
Type
scalar
Access
readwrite
Status
mandatory
Parent
generalDeviceStatus
Siblings
14

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gdStatusBytes mandatory
The number of valid bytes in the gdStatusEntry array.
scalarInteger32.1.3.6.1.4.1.11.2.3.9.1.1.1
gdStatusJobTimeout obsolete
This value represents (in seconds) the maximum time of inactivity which must elapse before the JetDirect card switches from the current network protocol to another when a normal e…
scalarInteger32.1.3.6.1.4.1.11.2.3.9.1.1.10
gdStatusPjlUstatus obsolete
This object will enable/disable PJL ustatus. disabled (0), enabled (1)
scalarInteger32.1.3.6.1.4.1.11.2.3.9.1.1.11
gdPasswords mandatory
This object is used as a 256 byte NVRAM area for JetAdmin. It is completely managed by JetAdmin. Initially it is initialized to all zeros. A coldboot will re-initialize to all …
scalarOctetString.1.3.6.1.4.1.11.2.3.9.1.1.13
gdStatusAtPrinterName mandatory
The AppleTalk name of the printer.
scalarOctetString.1.3.6.1.4.1.11.2.3.9.1.1.18
gdStatusAtPrinterType obsolete
The AppleTalk type of the printer.
scalarOctetString.1.3.6.1.4.1.11.2.3.9.1.1.19
gdStatusEntrynode-.1.3.6.1.4.1.11.2.3.9.1.1.2
gdStatusDisplay mandatory
The string diplayed on the peripheral front panel. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this is always a zero length string.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.9.1.1.3
gdStatusJobName mandatory
The current job name set by the peripheral. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this is always a zero length string.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.9.1.1.4
gdStatusSource mandatory
A string indicating the name of the physical port or protocol the printer is currently getting data from.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.9.1.1.5
gdStatusPapstatus mandatory
A string indicating the Appletalk papstatus response.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.9.1.1.6
gdStatusId mandatory
A formatted string describing this peripheral.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.3.9.1.1.7
gdStatusDisplayCode obsolete
This is the display code that the peripheral uses to tell the card what type of display the front panel of the printer is. Starting with firmware release X.20.06 and s…
scalarInteger32.1.3.6.1.4.1.11.2.3.9.1.1.8
gdStatusNlsCode mandatory
This value is the representation of what native language the printer is in currently.
scalarInteger32.1.3.6.1.4.1.11.2.3.9.1.1.9