gdStatusConnectionTerminationAck
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.1.1.2.5
Object
scalar
obsolete
Integer32
This indicates whether the peripheral is waiting for the Connection termination ACK. When non-zero, it is waiting. When zero, it is not waiting.
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.1.1.2.5- Type
- scalar
- Access
- readonly
- Status
- obsolete
- Parent
- gdStatusEntry
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gdStatusLineState mandatory This describes the line state of the peripheral.
When non-zero, the peripheral is off-line. When
zero the peripheral is on-line. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.1 |
| gdStatusTonerLow mandatory This indicates that the peripheral has a low toner condition.
off (0),
toner-low (1),
no-toner-cartridge (2)
For some peripherals, such as the HP LaserJet IIISi printer
or HP Desi… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.10 |
| gdStatusPagePunt mandatory This indicates that the peripheral did not receive data fast
enough to keep up with the print engine when generating a page.
For some peripherals, such as the HP LaserJet IIISi pr… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.11 |
| gdStatusMemoryOut mandatory This indicates that the peripheral did not have enough memory
to render an image on a page.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.12 |
| gdStatusIoActive mandatory This indicates that the peripheral is processing data from
this I/O interface card. For some peripherals, such as the
HP LaserJet IIISi printer or HP DesignJet plotter,
this value… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.13 |
| gdStatusBusy mandatory This indicates that the peripheral is busy processing
print/plot data.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is always a … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.14 |
| gdStatusWait mandatory This indicates that the peripheral is waiting for print/plot
data to process.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is al… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.15 |
| gdStatusInitialize mandatory This indicates that the peripheral is initializing or
warming up.
off (0),
initializing (1),
warm-up(2)
For some peripherals, such as the HP LaserJet IIISi printer
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.16 |
| gdStatusDoorOpen mandatory This indicates that the peripheral cover or door is open.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is always a zero (0). | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.17 |
| gdStatusPrinting mandatory This indicates that the peripheral is printing or otherwise
marking or moving paper.
off (0),
ordinary-page (1),
test-fonts-config-or-start-page (2)
For some periph… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.18 |
| gdStatusPaperOutput mandatory This indicates that the peripheral has a paper output problem
such as the output storage bin being full.
off (0),
output-storage-full (1)
For some peripherals, such as t… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.19 |
| gdStatusPaperState mandatory This describes the state of the paper on the peripheral.
When non-zero, the peripheral has a paper problem. When
zero, the peripheral does not have a paper problem. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.2 |
| gdStatusReserved obsolete This is the reserved area that is not currently
used, but will allow for growth within the gdStatusEntry table. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.1.1.2.20 |
| gdStatusNovBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.21 |
| gdStatusLlcBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.22 |
| gdStatusTcpBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.23 |
| gdStatusAtBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.24 |
| gdStatusInterventionState mandatory This describes the intervention state of the
peripheral. When non-zero, the peripheral requires
human intervention to continue working. When
zero, it requires no assistance. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.3 |
| gdStatusNewMode obsolete This indicates to which read channel state the
card should move. When non-zero, the card should
indicate that the read channel is idle. When zero,
the card should indicate that … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.4 |
| gdStatusPeripheralError mandatory This is the error code from the peripheral. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.6 |
| gdStatusPaperOut mandatory This indicates that the peripheral is out of paper.
off (0),
paper-out-or-paper-mount (1),
manual-paper-feed-needed (2)
For some peripherals, such as the HP LaserJet IIISi printer… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.8 |
| gdStatusPaperJam mandatory This indicates that the peripheral has a paper jam.
off (0),
paper-jam(1)
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is always… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.9 |