gdStatusAtPrinterType
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.1.1.19
Object
scalar
obsolete
OctetString
The AppleTalk type of the printer.
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.1.1.19- Type
- scalar
- Access
- readonly
- Status
- obsolete
- Parent
- generalDeviceStatus
- Siblings
- 14
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gdStatusBytes mandatory The number of valid bytes in the gdStatusEntry
array. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.1 |
| gdStatusJobTimeout obsolete This value represents (in seconds) the maximum time of
inactivity which must elapse before the JetDirect card
switches from the current network protocol to another when
a normal e… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.10 |
| gdStatusPjlUstatus obsolete This object will enable/disable PJL ustatus.
disabled (0),
enabled (1) | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.11 |
| gdStatusLaaSupport mandatory This value represents what protocols Locally Administered
addressing is supported over. This is currently 0 for
802.3 cards and 7 for 802.5 cards. LAA is not supported
on 802.3.… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.12 |
| gdPasswords mandatory This object is used as a 256 byte NVRAM area for JetAdmin. It
is completely managed by JetAdmin. Initially it is initialized
to all zeros. A coldboot will re-initialize to all … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.1.1.13 |
| gdStatusAtPrinterName mandatory The AppleTalk name of the printer. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.1.1.18 |
| gdStatusEntry | node | - | .1.3.6.1.4.1.11.2.3.9.1.1.2 |
| gdStatusDisplay mandatory The string diplayed on the peripheral front panel.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this is always a zero length string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.3 |
| gdStatusJobName mandatory The current job name set by the peripheral.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this is always a zero length string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.4 |
| gdStatusSource mandatory A string indicating the name of the physical port or protocol
the printer is currently getting data from. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.5 |
| gdStatusPapstatus mandatory A string indicating the Appletalk papstatus response. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.6 |
| gdStatusId mandatory A formatted string describing this peripheral. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.7 |
| gdStatusDisplayCode obsolete This is the display code that the peripheral uses
to tell the card what type of display the front
panel of the printer is.
Starting with firmware release X.20.06 and s… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.8 |
| gdStatusNlsCode mandatory This value is the representation of what native
language the printer is in currently. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.9 |