form-feed

HP-LASERJET-COMMON-MIB · .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5

MIB view Table view

Object

scalar mandatory r/w Enumeration

Instructs the PDL processing sub-system to finishing
processing the current page of the current job.  Form
feed is also known as close page or eject page.  If the
PDL processing sub-system is in a FORM-FEED-NEEDED
state, this causes the device to flush or finish
processing the current page of the current job.  If the
device is not in the FORM-FEED-NEEDED state, an
<genErr> will occur.

Context

MIB: HP-LASERJET-COMMON-MIB
OID: .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5
Type: scalar
Access: readwrite
Status: mandatory
Parent: settings-pdl
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	eFalse
`2`	eTrue

Related Objects

Sibling Objects

Object	Type	Syntax	OID
default-page-protect mandatory Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If eOn, then memory i…	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10`
default-lines-per-page mandatory Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causi…	scalar	Integer32	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11`
default-vmi mandatory Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupported value causes the…	scalar	Integer32	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12`
default-media-size mandatory This indicates the default media size. A write of an unsupported value causes an <badValue>. Complete list of supported media sizes along with their dimensions are listed in the …	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13`
cold-reset-media-size mandatory Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs.	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19`
default-orientation mandatory Returns or changes the default orientation. The list of supported values should be documented in the device POS.	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.2`
default-media-name mandatory Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This string must be one of the MEDIAn-NAME objects. Th…	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22`
reprint mandatory Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the device will not attempt to reprint jammed pages. If e…	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36`
wide-a4 mandatory Returns or changes the wide A4 logical page size setting. If eOn, then the margins/printable area of A4 paper will be changed to allow 80 10-pitch characters to be printed on a s…	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.37`
dark-courier mandatory Returns or changes the dark Courier setting. If eOn, then the Courier font used will approximate the same darkness as the LaserJet III printer. If eOff, then the Courier font us…	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.38`
default-bits-per-pixel mandatory Controls the number of levels used (per pixel) when printing grayscale or color images.	scalar	Integer32	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39`
default-copies mandatory Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are printed. The print…	scalar	Integer32	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4`
resource-saving mandatory Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another PDL is active. Resource saving is also called envi…	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6`
maximum-resource-saving-memory mandatory This object's name is misleading. This object returns the maximum amount of additional memory, in bytes, that can be dedicated to holding PDL permanent soft resources. Additional…	scalar	Integer32	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.7`
default-vertical-black-resolution mandatory Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In LaserJet 4050 Series changing this OID also causes …	scalar	Integer32	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8`
default-horizontal-black-resolution mandatory Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In LaserJet 4050 Series changing this object also ca…	scalar	Integer32	`.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9`