file-system-wipe-disk

This object is a non-leaf node which will have one leaf node		
under it for each file system in the printer. The leaf nodes		
will be in a 1-to-1 correspondence with the hrDeviceIndex		
objects. This object specifies for each leaf node whether the		
file system on the device is going to be erased according to		
the setting of the FILE-SYSTEM-ERASE-MODE referenced by the		
corresponding hrDeviceIndex. A file system will be overwritten		
on system reboot if this object is set to 1. It will be		
unchanged if this object is set to 0. If this object's value is		
-1 then the file system cannot be wiped. If the file system		
contains the permstore, the permstore will be saved off and		
restored after the file-system wipe is completed. This object		
is always readable. It is writable when		
FILE-SYSTEM-SECURITY-ACCESS-PASSWORD is the empty string or		
when a write to FILE-SYSTEM-SECURITY-ACCESS-PASSWORD with the		
current password has preceeded the write to the object. When		
FILE-SYSTEM-SECURITY-ACCESS-PASSWORD is not the empty string		
then this object becomes read-only after a successful write to		
it. FILE-SYSTEM-SECURITY-ACCESS-PASSWORD must then be written		
to again with the current password in order to make another		
write operation on the object possible. If the		
FILE-SYSTEM-SECURITY-ACCESS-PASSWORD is incorrectly set, this		
object becomes read-only until the password is correctly set.

MIB

HP-LASERJET-COMMON-MIB

OID

.1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.12

Type

scalar

Access

readwrite

Status

mandatory

Parent

settings-file-system