file-system-max-open-files
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2
Object
scalar
mandatory
r/w
Integer32
The number of open files allowed at one time. Opening a file when the maximum number of files are currently open will fail. Additional information: Indicates the number of open files a personality (e.g. PCL or PostScript) is guaranteed to be able to open before the file system runs out of file handles. After writing this object, the printer must be rebooted (powercycled) before the change takes effect. This object supports any value between 32 - 512 inclusive. If a value Less then 32 then it snaps to 32 if greater then 512 it snaps to 512. The factory default value is dependent on the amount of installed RAM. The default value of 32 is when Memory <= 4MB, 128 is if the memory is > 4MB. Performing a cold reset sets this object back to the factory default value. Returns <noSuchName> status if attempting to access this object and there is no storage device is installed. Default for LaserJet 4000 Series/LaserJet 5000 Series is 32 Default for LaserJet 8000 Series/LaserJet 8100 Series/LaserJet 4050 Series is 128
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- settings-file-system
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Enumerated Values
1 | eFalse |
2 | eTrue |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| file-system-memory mandatory The amount of memory, in bytes, used by the file system
to buffer file data.
Additional information:
Reports the amount of memory, in bytes,
reserved for use by the file system. … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.1 |
| file-system-external-access-capabilities mandatory This object is used to control access to the file system of the
device. It is always readable. It is writable when
FILE-SYSTEM-SECURITY-ACCESS-PASSWORD is not the empty string… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.10 |
| file-system-erase-mode mandatory This object is used to control how file data is handled when
files are deleted. It is always readable. It is writable when
FILE-SYSTEM-SECURITY-ACCESS-PASSWORD is the empty st… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.11 |
| file-system-wipe-disk mandatory This object is a non-leaf node which will have one leaf node
under it for each file system in the printer. The leaf nodes
will be in a 1-to-1 correspondence with the hrDeviceI… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.12 |
| file-system-wipe-disk-status mandatory This object is a non-leaf node which will have one leaf node
under it for each file system in the printer. The leaf nodes
will be in a 1-to-1 correspondence with the hrDeviceI… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.13 |
| file-system-test-return-code mandatory This test object that will not be supported in any
released product. Setting this object allows the next
file system call return code to be specified or to
simulate uninitialized… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.3 |
| file-system-set-system-partition-writeable mandatory This object allows the system partition to be written to. It
consists of a C structure containing the following fields:
typedef struct {
ubyte password[8]; … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.6 |
| file-system-set-system-partition-readonly mandatory Changes a system partition to be READ-ONLY. The value is the
volume number to change. If the volume number specified is NOT
a system partition an error is returned.
Additional… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.7 |
| file-system-delete-files mandatory Setting this object causes the specified filename to be
deleted, after first validating that the authentication data is
correct for the specified user ID.
The format … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.8 |
| file-system-security-access-password mandatory This object acts as a gate keeper for write access to the PML
objects FILE-SYSTEM-EXTERNAL-ACCESS-CAPABILITIES,
FILE-SYSTEM-ERASE-MODE, and FILE-SYSTEM-WIPE-DISK. The object … | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.9 |