fax-rx-disposition

Indicates what is to be done with the incoming fax
call.  
  ePrintOnly - New fax arrivals only go to the printer.
If printer becomes unavailable, the fax is stored in
device memory until the printer becomes available.  If
device memory becomes full, no subsequent calls will be
answered.  If power is cycled on the device, the user
must be informed of any lost faxes.  If faxes are saved
in non-volatile memory, then they will be printed upon
successful power-up.  
  eUploadOnly - New fax can only be uploaded to the
host.  If host becomes unavailable, the fax is stored in
device memory until host becomes available again to
upload.  If device memory becomes full, no subsequent
calls will be answered.  If power is cycled on the
device, the user must be informed of any lost faxes.  If
faxes are saved in non-volatile device memory, the host
must be informed of a need to upload saved faxes upon
successful power up.  
  eUploadAndPrint - Received faxes are to be printed and
also uploaded to the host.  The fax is stored in device
memory until it has been printed and uploaded.  If
device memory becomes full, no subsequent calls will be
answered.  If power is cycled on the device, the user
must be informed of any lost faxes.  If faxes were saved
into non-volatile memory, then faxes must be printed and
uploaded before erasure from device memory.  
  eUploadElsePrint - Received faxes are to be uploaded
if host is available, otherwise the fax is printed.
During an upload, if the host becomes unavailable, the
remainder of the fax is printed.  Once the host is
detected to be unavailable, the object will transition
to ePrintOnly.  Refer to fax reception behavior for
ePrintOnly.  
  ePrintElseUpload - Received faxes are to be printed.
If printer is unavailable, the fax will be uploaded.  If
printer becomes unavailable while the fax is being
received, the remainder unprinted pages of the fax will
be uploaded.  If host then becomes unavailable, this
object will transition to ePrintOnly.  Remainder pages
of the fax being uploaded will be stored in device
memory, to be printed when printer becomes available.
If device memory becomes full, no subsequent calls will
be answered.  If power is cycled on the device, the user
must be informed of any lost faxes.  
  eForwardElsePrint - Received faxes are to be forwarded
to another fax station.  If remote number does not
answer, fax is printed.  If remote number is busy on
multiple redial attempts, the fax is printed.  If device
memory becomes full before fax reception is complete,
the fax is printed.  If printer becomes unavailable, the
fax is stored in device memory and then printed when
printer becomes available again.

MIB

HP-LASERJET-COMMON-MIB

OID

.1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.19

Type

scalar

Access

readwrite

Status

mandatory

Parent

settings-fax-proc-sub