fax-download
HP-LASERJET-COMMON-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.6
Object
scalar
mandatory
r/w
Enumeration
Note: Changed enumeration values in a non-backwards manner in version 4.7. Handshake mechanism between host and device to initiate and coordinate the download of fax image data to be transmitted by the device fax modem. This object serves both as an indicator of fax download activity as well as a trigger for the host to alter fax download progress. This object has been redefined to track only the download acpect of the fax transmission. eFaxDownloadIdle - indicates no fax download activity is occurring. Device powers up in this state but will otherwise never transition to this state of its own accord. Host setting to eFaxDownloadIdle while object is in eFaxDownloadActive will cause download activity to be prematurely terminated. Host setting to this state resets the handshake mechanism to permit a another fax download activity to be initiated. eFaxDownloadStart - indicates the host requests to commence a download session for sending a fax. This state is host settable only from eFaxDownloadIdle. Device will never transition to this state of its own accord. eFaxDownloadActive - indicates a fax download is occurring. This state is not host settable. Device will transition to this state from eFaxDownloadStart as a positive response for host to commence download of fax data. This state is not host settable. The object FAXJOB-DOWNLOAD-ID now contains the job ID to be used to track the progress of this fax job. eFaxDownloadAborted - indicates the fax download activity has been prematurely terminated by the device due to some error. Object FAX-DOWNLOAD-ERROR contains the error reason for the premature session termination. This state is device settable from eFaxDownloadStart or eFaxDownloadActive. This state is not host settable. If modem transmission of fax data has started for this download, the fax session will also be aborted. eFaxDownloadDone - indicates the fax download activity has reached a successful termination in that the device has accepted all the download data from the host. This state is only settable by the device from eFaxDownloadActive. This state is not host settable. This state does not indicate the progress of the modem transmission of the downloaded fax data. Host should transition from this state to eFaxDownloadIdle in order to reset the handshake mechanism for subsequent download.
Context
- MIB
- HP-LASERJET-COMMON-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.6- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- settings-fax-proc-sub
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | eDisabled |
2 | eEnabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fax-rxscale mandatory Received faxes are to be printed at a reduced scale
percentage. Value of 0 indicates auto-scaled printing
based on the length of the received fax image and the
length of the pape… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.1 |
| fax-tx-phone-number mandatory Phone number about to be dialed. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.10 |
| fax-redial-time mandatory Number of seconds one must wait between the current
redial (set by FAX-WHICH-REDIAL) and any prior dialing. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.14 |
| fax-pstn-access-code mandatory The code used within a PBX to get access to an outside
PSTN line. Typically this is ''9''. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.18 |
| fax-rx-disposition mandatory Indicates what is to be done with the incoming fax
call.
ePrintOnly - New fax arrivals only go to the printer.
If printer becomes unavailable, the fax is stored in
device memo… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.19 |
| fax-error-correction-mode mandatory Indicates whether the device is configured to send
and receive faxes in error correction mode (ECM).
This object controls both receiving and transmitting
in ECM. A value of eDisab… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.21 |
| fax-report-transmission mandatory Provides a host application with the ability to
print a fax transmission report. The supported
enumerations are:
eNone - no transmission report printed
ePrintReport - trans… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.22 |
| fax-report-activity-log mandatory Specifies when a report of fax transactions is to be
printed.
eNever - to never print a transaction report.
eThreshold - to automatically print a transaction
re… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.23 |
| fax-dial-tone-detection mandatory Determines whether the fax machine waits for a dial tone
before dialing a fax number. eEnabled - causes the fax
machine to wait until a dial tone is recognized before
attempting t… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.24 |
| fax-alarm-volume mandatory Range is 0..100, where 0 = quietest possible, and
100 = loudest possible. A device shall divide this value
into ranges corresponding to the possible volumes and
document these set… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.25 |
| fax-beep-volume mandatory Range is 0..100, where 0 = quietest possible, and
100 = loudest possible. A device shall divide this value
into ranges corresponding to the possible volumes and
document these set… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.26 |
| fax-ring-volume mandatory Range is 0..100, where 0 = quietest possible, and
100 = loudest possible. A device shall divide this value
into ranges corresponding to the possible volumes and
document these set… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.27 |
| fax-master-host mandatory Identifies the hostname of the master host to which
the device is connected. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.28 |
| fax-thumbnail-enable mandatory Controls whether or not a thumbnail reprint of the
first page of a fax shall be included on the
fax call report. When set to eEnabled a thumbnail shall
be included on the report.… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.29 |
| fax-noise-volume mandatory Range is 0..100, where 0 = quietest possible, and 100 =
loudest possible. A device shall divide this value into
ranges corresponding to the possible volumes.
Additional informati… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.3 |
| fax-phone-pickup-enable mandatory This object is included to handle the situation where a
fax machine and a telephone share the same phone line.
If a call picked up at the phone turns out to be a f… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.30 |
| fax-adf-scan-count mandatory This object tracks the page count for the pages scanned for
faxing from the ADF. In order to write this object
SERVICE-PASSWORD must be set correctly.
Additional information:
This… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.31 |
| fax-print-page-count mandatory This object tracks the page count for the pages sent to the
print engine for fax jobs. In order to write this object
SERVICE-PASSWORD must be set correctly.
Additional information… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.32 |
| fax-download-page-count mandatory This object tracks the page count for the pages downloaded to
the peripheral for fax jobs. In order to write this object
SERVICE-PASSWORD must be set correctly.
Additional informa… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.33 |
| fax-upload-page-count mandatory This object tracks the page count for the pages uploaded from
the peripheral for fax jobs. In order to write this object
SERVICE-PASSWORD must be set correctly.
Additional informa… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.34 |
| fax-flatbed-scan-count mandatory This object tracks the page count for the pages scanned for
faxing from the flatbed. In order to write this object the
SERVICE-PASSWORD must be set.
Additional information:
This o… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.36 |
| default-fax-glass-size mandatory Indicates the default fax glass size.
Additional information:
Indicates the default fax glass size. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.37 |
| fax-cold-reset-fax-glass-size mandatory Returns or sets the fax glass size that is used as the
DEFAULT-FAX-GLASS-SIZE when a cold reset occurs.
Additional information:
Returns or sets the fax glass size that is used as … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.38 |
| fax-silent-detection mandatory When enabled, this object causes the FAX machine to
assume that the caller is a FAX even though the line has
remained silent for a time (i.e., no CNG detected).
When disabled, a C… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.7 |
| fax-ring-enable mandatory When the phone line rings, this object determines
whether an audible ring shall be emitted. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.8 |
| fax-country mandatory Note: Non-backwards compatible change make in version
4.7. Returns which country the telephone-electronics
(LIU) is configured for.
If this object is implemented… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.9 |